Replacement Hardware for Yakima 60" Roof Rack Tracks

Question

Question:

Why isnt the 60inch track mentioned as a possible size for this replacement?

asked by: Mark P

0

Expert Reply:

The Replacement PlusNut Hardware for Yakima Roof Rack Tracks # Y8810102 works only to replace the original PlusNut and washer on Yakima 42" # Y01126 or 54" # Y01127. For the complete hardware kit see Replacement PlusNut Hardware Kit # Y8880039.

For your Yakima 60" Roof Rack Tracks # Y01135 you need replacement kit # Y8810155 since we don't sell individual parts for this kit separately. This kit includes 12 capnuts, 12 bolts, 9 black nylon washers and 13 white nylon washers.

expert reply by: Carla M

0

Answer 1

The screws that come with the Yakima Y8810155 are #10-32x1” and the capnuts are 1/2 x 1-1/4”.

view full answer...

Answer 2

I have a possible solution for you, but there are not any crossbars that will extend all the way to 8' feet. I recommend going with the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 74" #RRRTV188 which is are 74" long…

view full answer...

Answer 3

There isn't a pdf of a track fit sheet but basically it wants you to select the tracks that won't be too long to fit your camper shell. It also tells you to be sure to place the tracks equal distance from the rear of the camper shell and from…

view full answer...

Answer 4

If the instructions for the Yakima 60" Tracks for Roof Racks #Y01135 state to use the mounting bolts on every other hole then the 12 mounting bolts included in part #Y8810155 is enough for 2 tracks. Although you can cut them to size, if you use…

view full answer...

Answer 5

Part #RRRTV208 works for your application. You need part #RLTP and part #RRVA137S-2. This is a universal roof rack system and most people don't like drilling into the roof. Personally I would go with part #298-SX6000B for your Suburban. This is a…

view full answer...

Answer 6

For the Yakima PlusNuts like part #Y8810102 I called Yakima and they told me the thread dimensions are 10-32 mm with a thread pitch of .75.

view full answer...

Answer 7

The Replacement PlusNut Hardware Kit, part #Y8880039 you asked about are 10-32 mm with a thread pitch of .75 inch according to our contact at Yakima.

view full answer...

Answer 8

For a set of 54 inch heavy duty crossbars we have the Rhino Rack roof rack part #Y01-120B-NT which is a complete roof rack setup to fit the tracks on your camper shell. Or if you prefer an aero bar type roof rack we have the Thule WingBar roof rack…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Hardware for Yakima 60" Roof Rack Tracks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching