What is Sway Control and Can it Be Used with 2011 Ford Flex
Question:
Greetings, I have three separate questions regarding your hitch #75679: The Ford Flex 2011 towing guide website URL is copied below says that a Class III Trailer Tow package which includes a class-exclusive Trailer Sway Control will allow me to easily tow up to 4500 lbs.inch First question: What is a Trailer Sway Control? Second question: is that Trailer Sway Control included as part of your hitch #75679? Third question: Your website says that your hitch #75679 exceeds industry standards and will allow for a GTW and a WD GTW of 4000 lbs. Yet the Ford website says that the Flex can tow 4,500 lbs. Where did that extra 500 lbs go? Sincerely,
asked by: Doug B
Expert Reply:
Trailer sway control is a type of device designed to either prevent or reduce trailer sway when on the highway. A very common style is the frictions way control like the # 83660 which attaches to the tow vehicle and the trailer and uses friction between the two when the trailer turns to try and reduce sway caused by high winds or passing semi trucks. See attached review video.
Sway control is not included with the Draw Tite part # 75679 but it can be used with it like the # 83660.
Hitch capacities are determined independently from the vehicle they were designed to fit. So for a hitch with a higher capacity that fits your 2011 Ford Flex we have the Curt # 13551 which can tow up to 5,000 lbs. You would be limited by the lowest rated component in your towing setup which in your case would be the vehicle.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Reese
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Trailer Hitch Recommendation for 2016 Ford Flex with Dual Exhaust
- Q&A: Recommended Trailer Hitch for a 2016 Lincoln MKT
- Q&A: Recommended Trailer Hitch for 2013 Ford Flex Limited with Dual Exhaust
- Q&A: Trailer Hitch Recommendation for 2018 Ford Flex
- Q&A: Why Would Trailer Hitch Install Hardware Seem Too Large to Fit Vehicle
- Article: How to Choose the Right Trailer Hitch Class
- Article: Determining Trailer Tongue Weight
- Q&A: Do Install Bolts for Curt Hitch of 2016 Ford Flex Use Factory Weldnuts
- Q&A: Recommended Parts Needed to Tow with a 2019 Ford Flex
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Performance Chips and Modules
- Article: Trailer Wiring Diagrams