Looking for Circuit Board to Replace 91349 In Atwood RV Water Heater

Question

Question:

Hi, im looking for ATWOOD P/N 91349

asked by: Yeney B

0

Expert Reply:

The # AT91367 we offer is the same exact circuit board as the Atwood 91349. The # AT91367 is the correct replacement. I have definitively confirmed this by speaking with my Dometic (formerly Atwood) representative.

expert reply by: Mike L

0

Answer 1

We have previously confirmed with Dometic (who own Atwood now) that the Atwood 91349 that you've got can be replaced by the Replacement Control Panel for Atwood Water Heaters #AT91367 you were looking at.

view full answer...

Answer 2

The correct replacement circuit board for your 91349 is the #AT91367.

view full answer...

Answer 3

Yes, if you have the Atwood/Dometic RV Water Heater (G6A-8E) then the correct replacement circuit board for you is the Replacement Control Panel for Atwood Water Heaters part #AT91367.

view full answer...

Answer 4

I won't be able to provide troubleshooting advice for a water heater as this needs to be done by a trained RV technician but the correct replacement circuit/control board for an Atwood Water Heater 91349 is the Replacement Control Panel for…

view full answer...

Answer 5

I went ahead and reached out to Dometic (the makers of Atwood), and they said that they do not recognize the circuit board with a model number of 93257. However, we do carry the gas-only control panel. That is part #AT91367. This particular control…

view full answer...

Answer 6

I was able to find out from Dometic, who took over Atwood's water heater division and the Replacement Control Panel #AT91367 you were looking at will be the correct part.

view full answer...

Answer 7

The number 96220 is the OEM part number of the discontinued Atwood G6A-8E Water Heater AT96121 and we do have the correct circuit board (control panel) for that. The part you need is the Replacement Control Panel for Atwood Water Heaters #AT91367.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Looking for Circuit Board to Replace 91349 In Atwood RV Water Heater

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching