Hydraulic Brake Assembly Recommendation for Trailer with 10 inch Diameter Drums
Question:
I have included 2 photos of my brake parts. Will Hydraulic Trailer Brake - Uni-Servo - 10 - Left Hand and Right Hand - 3,500 lbs Fit my boat trailer??? I would need a right and left assembly. Thank you for your time,
asked by: Rick
Helpful Expert Reply:
Yes, the hydraulic brake assembly part # AKUBRK-35L is the correct assembly you need for the left side of the trailer. For a set that includes both sides of the axle what you need is the part # AKUBRK-35. These assemblies are for the standard 10 inch brake assemblies that are found on 3,500 lb axles.
Products Referenced in This Question
Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Hydraulic Trailer Brake - Uni-Servo - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Single Servo
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 12" - Left and Right Hand Assemblies - 5.2K to 7K
- Q&A: Mounting Bolt Spacing and Center Hole Size for etrailer 10 Inch Hydraulic Trailer Brake Assembly
- Q&A: Replacement Hydraulic Drum Brakes for Trailer with 10-Inch Hub/Drums
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Hydraulic Trailer Brake - Uni-Servo - 10" - Left Hand - 3,500 lbs
- Q&A: Mounting Flange Bolt Pattern of Etrailer.com Hydraulic Trailer Brake Kit AKUBRK-35
- Q&A: Replacement Brake Shoe Lining for 10" Hydraulic Trailer Brakes
- Q&A: Free Backing Hydraulic Brakes for a 3,500 Lb. Axle
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKUBRK-35 Review
- Video: etrailer Hydraulic Trailer Brake Kit Installation
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Replacement Galvanized Hub and Drum Assemblies for Boat Trailer w/Bearings L68149 and L44649
- Search Results: couplers
- Search Results: brake lines
- Search Results: titan model 60
- Search Results: hydraulic brake hose
- Search Results: hydraulic lines
- Search Results: trailer coupler
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-247-50 Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKFBBRK-35-D Review
- Video: Kodiak Hydraulic Brake Line Kit Installation - 2018 Shasta Phoenix Fifth Wheel
- Video: Kodiak Trailer Brakes 18SI-BLKIT Review
- Search Results: electric brake wiring harness