Stainless Steel Rocker Panel Trim for 2011 Ford F-250 Crew Cab

Question

Question:

We are working on this truck in our body shop and we are trying to find the stainless accent trim on the bedside. I measures about 9 1/4 wide and the front piece is about 14 inches and the piece behind the wheel is about 16 inches. Trying to match up so we dont have to remove and replace all of it.

asked by: Dan M

0

Expert Reply:

I believe you are referring to the rocker panel stainless steel trimming on the 2011 Ford F-250 Crew Cab. If this is the case you will use the Putco # P9751454 if it has the 6-3/4 foot bed or the Putco # P9751455 if it has the 8 foot bed.

Just the bed side portion of these trim pieces is not available by itself.

expert reply by: Chris R

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 referenced in your question uses a coupler at the base to securely attach to a standard 2-5/16 inch diameter gooseneck ball. Top and side coupler bolts hold it in place so that…

view full answer...

Answer 5

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 6

Hello Cory. I can definitely point you in the right direction, but there is not a B&W Companion option that will fit into a round gooseneck ball hole. As you said, the B&W Companion hitch is only compatible with the B&W Turnoverball…

view full answer...

Stainless Steel Rocker Panel Trim for 2011 Ford F-250 Crew Cab

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching