Troubleshooting Running Lights not Working
Question:
Running light fuse an where is it located in a 2000 mallard Please help me , cant figure out why my running lights wont work
asked by: Kim O
Expert Reply:
I can help you with some steps to take to try and figure out why your running lights are not working, though we do not have any type of locations for fuses. Instead, there are a few troubleshooting steps you'll have to take, so in order to determine the specific problem you will need to purchase a circuit tester if you do not have one - the very handy Cordless Circuit Tester # PTW2979 would be my strong recommendation due to how easy it is to use - and test the connector on your vehicle after disconnecting it from your trailer. Check the wiring going into your to see if those wires are carrying the correct signals, if not then the issue is with the vehicle wiring.
If the signals going to your harness are okay, you'll need to test the signals coming out of the harness, and if they are correct then your issue is likely going to be with the trailer side wiring. You will also want to check both your vehicle and trailer connectors for corrosion, which can be green or white in color. A build-up of corrosion can interfere with the signals getting through the connectors so if it is present you are going to need to either replace the plug or clean the corrosion. You'll also need to make sure your grounds are attached to bare metal surfaces and free of any paint, dirt or corrosion.
Finally, check your wiring thoroughly to ensure there are none that are crimped, broken or otherwise damaged. I have added links to a pair of help articles on trailer wiring, including a troubleshooting guide which I highly recommend taking a look at.
Product Page this Question was Asked From
Continue Researching
- Q&A: Testing for Proper Voltage on the Brake Output Circuit
- Article: Trailer Wiring Diagrams
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Q&A: Can Electric Brake Controller Install and Function in Semi Truck with Air Brakes
- Q&A: Replacement Circuit Board For Dometic Atwood Water Heater With Circuit Board 91346
- Q&A: No Power to 12 Volt on 7-Way of 2020 Ram 3500
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Why isn't 12 Volt 7-Way Trailer Wiring Circuit of 2022 Ram 3500 Rated Higher
- Q&A: How Long Does It Take to Install B&W Turnoverball Underbed Gooseneck Trailer Hitch BWGNRK1020
- Article: Troubleshooting Brake Controller Installations
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements