Locating the Brake Control and Battery Charge Wires on a 2007 GMC Yukon Denali
Question:
Where, under the hood, is the spade connector for the trailer brakes on my GMC Yukon Denalli? I found the other spade for the live power, but am having trouble locating the one for the brakes! Thanks for the help!
asked by: Brad M
Expert Reply:
The brake control wire you are looking for on your 2007 GMC Yukon Denali will be located between the fuse box and the driver side fender. It may be wrapped up in black electrical tape. Once you have located the wire you will need additional hardware to secure the wires to the studs. I have included links to the two nuts used to secure the wires to the studs.
I have included an article and a video that shows the location of the brake control wire and the battery charge wire on your vehicle. The vehicle in the video is a 2007 Cadillac Escalade, but the wire locations are the same. Be careful you do not raise the gray handle near the studs on the fuse box more than 3/8 of an inch because the fuse box can become disconnected from the electrical connector.
Products Referenced in This Question
Zinc Plated Hex Flange Nut - M8
- Accessories and Parts
- Trailer Brake Controller
- Hardware
- Nuts
- Hex Nut
- Flint Hill Goods
more information >
Product Page this Question was Asked From
Zinc Plated Hex Flange Nut - M6
- Accessories and Parts
- Trailer Brake Controller
- Hardware
- Nuts
- Hex Nut
- Flint Hill Goods
more information >
Continue Researching
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Shop: Brake Controller
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 - 86-1/2" Long - 6,000 lbs
- Q&A: What Size Nuts Are Needed to Connect Wires Under Hood for Brake Controller Installation on GMC Yukon
- Shop: Hayes Syncronizer Trailer Brake Controller - 1 to 2 Axles - Time Delayed
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: 3500 lb axle with brakes
- Search Results: 94 00 1000
- Q&A: Driving in Reverse with Fastway e2 Weight Distribution with Sway Control
- Shop: Replacement L-Brackets w/ Mounts for Blue Ox TrackPro and 2-Point Weight Distribution - Qty 2
- Shop: Replacement Outer Link Plate for Fastway e2 Sway-Control Bracket
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Trailer Wiring
- Q&A: Which Way Should Bow of Trailer Axle Face When Installed on Trailer
- Search Results: trailer screen door
- Video: etrailer Easy Grease Hub And Drum Assembly Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Search Results: brake controller
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Choosing the Right Brake Controller
- Search Results: trailer brake controller
- Search Results: 25580
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Lug Nut Torque Chart for Trailer Wheels