Is Wiring Harness of Jensen RV Stereo JWM60A the Same as the Older AWM970

Question

Question:

Will the connection plug be the same as the old AWM970? Thanks Dan

asked by: Dan S

0

Expert Reply:

The harnesses aren't identical, but I can provide a diagram for each so that wiring the # AWM970 will be easier.

expert reply by: Mike L

0

click to enlarge

Answer 1

To replace your JVR9000 I recommend the Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth #JWM40. It has slightly different dimensions that can be easily fixed using a dash plate. This won't have a monitor to watch your video feeds from so…

view full answer...

Answer 2

The location of your fuse on your Jensen RV Stereo #JWM60A is on the back of the unit below the 20 pin connector. To access this fuse, you will have to remove the side panels, so you can access the screws. Once the screws are removed, you can…

view full answer...

Answer 3

After looking up the wiring diagrams for your old RV Stereo AWM970 and your new Jensen RV Stereo #JWM60A (Jensen part number JWM62A) you new stereo should actually have 3 more wires, not less wires. The AWM970 had two connectors, a 12 pin and a 4…

view full answer...

Answer 4

Between the two stereos the 12 volt trigger wire and 12 volt remote wire are the same circuit so that wire. The rest would wire up the exact same. There should be an other 12 volt DC power wire connection to make on the #JWM60A though. Basically…

view full answer...

Answer 5

The closest replacement with an HDMI port to your cutout size is the iRV RV Stereo - Double DIN - HDMI, AUX, Bluetooth, App Control - 50W - 3 Zone - 12V Item #IRV64FR. It is smaller than your current cutout so I recommend getting a dash plate and…

view full answer...

Answer 6

For some reason RV stereo manufacturers make every one of their stereo wiring harnesses different to make the consumer work harder than they need to. There isn't an adapter available to switch from your old AWM910 to your new Jensen RV…

view full answer...

Answer 7

The Jensen RV Stereo part #JWM60A would be an excellent replacement option for the Jensen RV Stereo part AWM910. The cutout size needed as well as the mounting hole locations are virtually identical between the two units so this part of the process…

view full answer...

Answer 8

The Jensen Mechless RV Stereo #JWM20 that you mentioned can replace the Jensen AWM965 like you are wanting it to. The dimensions are different so as long as you are willing to work with that it would work just fine. This is a 4 channel stereo though…

view full answer...

Answer 9

The Jensen RV Stereo #JWM60A that you referenced is a great option to replace your Jensen AWM910 as they feature very similar overall and mounting dimensions. With that being said there isn't a wiring harness/adapter available to make this switch…

view full answer...

Answer 10

I've attached the wiring diagrams for the AWM970 and the #JWM60A to use as a reference. It looks like the AWM970 has different 12v wires at spot 2, 3 and 10 on the harness where the Jensen #JWM60A has power on pin 15.

view full answer...

Answer 11

The amp remote wire you mentioned would get ran to an external amp like for a sub as a trigger wire to tell it to turn on when needed. If you aren't running an external amp this would need need to get wired. The pink wire of the old harness would…

view full answer...

Answer 12

We do have replacement options for the Jensen JRV9000 though they are not touchscreen or video compatible. The JRV9000 is a double din so you will need to replace it with such like the Jensen RV Stereo part #JWM60A which is a more basic model. The…

view full answer...

Is Wiring Harness of Jensen RV Stereo JWM60A the Same as the Older AWM970

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching