Brake Controller Compatibility With Electric Over Hydraulic Actuator for Disc or Drum Brakes
Question:
Well Tekonska Brake controller 90885-3035-P work with either Brake Rite T 4813102 0r T 4822500. In other words Disc or Drum brakes. If not which controller should I use. Wiring to a 2001 Ford F-350 diesel dually
asked by: Lynn
Expert Reply:
The Tekonsha P2 Prodigy Brake Controller, part # 90885, with Plug-In Wiring Adapter, part # 3035-P, will work with the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit part # T4813102. First you will want to determine if your 2001 Ford F-350 has a 7 way or 4 way trailer connector.
If you have a 7 way connector then you should have no problem mounting the brake controller and connecting the wiring adapter to the brake controller port located under the dash. If your vehicle has a 4 way connector only you will need the Brake Controller 7 and 4 Way Installation Kit, part # ETBC7. This will allow you to run the additional brake and power wires from the brake controller to the trailer connector. I have included a link to an article and a video detailing the steps of converting a 4 way connector to a 7 way.
Thisn updated Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit # T4813102 connects directly to the 7-way.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Dexter BrakeRite II Electric Over Hydraulic Actuator Kit - Vented - 1,500 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- Disc Brakes
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Choosing Between Lippert Equa-Flex Or Roadmaster Comfort Ride For 2018 Grand Design Momentum 351M
- Article: Trailer Wiring Diagrams
- Q&A: Which Trailer Electric Over Hydraulic Actuator is the Best
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Can Control Module on Titan BrakeRite II SD be Replaced
- Q&A: Distance from Center of Hitch Pin to Inside Bottom of Brophy Pintle Hook
- Q&A: What do Wires of Dexter BrakeRite Electric Over Hydraulic Actuator DX82KR Do
- Q&A: Recommendation for Best Electric Over Hydraulic Actuator for Disc Brake Boat Trailer
- Q&A: Troubleshooting Titan BrakeRite Electric Over Hydraulic Trailer Brake Actuator-Won't Build Pressure
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Curt Echo Full Review
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft