Picking Out Replacement Brake Assemblies for 2010 Keystone Alpine 3640RL
Question:
What is the correct replacement inserts for brakes on my3640rl alpine? I want to replace magnet and all
asked by: Larry
Helpful Expert Reply:
I can help you find the right assemblies, but I do not know exactly which ones you have on your trailer. I looked up your Keystone Alpine 3640RL and it appears to be rated for around 15k and has a tandem axle setup so you'll most likely need higher rated assemblies.
To pick out the correct brake assemblies for your trailer you need to know a few things.
You will want to measure the inner diameter of your hub/drums and the depth of the drums to determine what brake assembly dimensions you need. For example the part # AKEBRK-8 is a 12-1/4 by 3-3/8 inch brake assembly set.
You also want to determine what the bolt pattern is of your assembly mounting flange. The standard size is 4 on 4 inch. You also want to determine the axle capacity of your trailer and go with an assembly that has the same rating, the # AKEBRK-8 has an 8,00 lb capacity.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 8K
- Shop: Dexter Trailer Hub and Drum Assembly - 8,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Shop: Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-8 Review
- Search Results: 8~285~10
- Shop: Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2
- Q&A: What is the Four Bolt Brake Mounting Flange for 8,000 Lb Axles
- Shop: Dexter Trailer Hub and Drum Assembly for 8,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Oil Bath
- Search Results: 10~63
- Search Results: dexter 8 285
- Q&A: How to Determine Dexter Axle Weight Capacity
- Q&A: What Kind of Oil is Used for a Wet Bath Hub and Drum Assembly and How Much
- Shop: Unitized Oil Seal for Trailer Hubs
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Search Results: oil cap
- Q&A: Pilot Hole Diameter of 12-1/4" Electric Trailer Brake Kit w/ Dust Shields
- Search Results: 8~285~10uc3~a
- Search Results: 8~218
- Q&A: Mounting Bolt Pattern and Center Hole Diameter For Dexter Trailer Brake Assemblies 23-248 and 23-429
- Q&A: How to Choose the Correct Brake Assembly for Trailer Axles
- Q&A: AxleTek Brake Assembly Recommendation for 8k Axles with 4 Bolt Mounting Pattern
- Search Results: 8~393
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Review
- Video: Review of Hydrastar Trailer Brakes - Tandem Axle Disc Brake Kit - HSE7K-T1SO