Availability of Dexter 4 Drop Axle with Idler Hub with 5 on 5-1/2 Bolt Pattern
Question:
I need two axles with 4 inch drop,89 inches to hub face, but the problem im having is to find them with 5-5.5 lug pattern. is there a way to order them this way. I have measured the distance between studs to center and get 3 1/4. please advise me on the best way to accomplish this. I didnt want to have to buy new rims and tires to fit the 5-4.5 hubs.
asked by: Brandon P
Expert Reply:
The Dexter Trailer Axle Beam w/ Idler Hubs # 8327812-I that you referenced is a kit that includes the following:
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - # 8327812
Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - # 84545UC1-EZ
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge Item # L11390
Since you are needing a 5 on 5-1/2" bolt pattern for the hub you can simply order the axle beam and the bearing grease from the kit above and then order the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles # 84555UC1-EZ as well which has the 5 on 5-1/2" bolt pattern you are looking for.
Something else to keep in mind is that this axle has a spring center measurement of 74". You need to make sure this matches your application as well to confirm that this trailer axle is the correct fit for you.
Products Referenced in This Question
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- Drop - 4 Inch
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Product Page this Question was Asked From
Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" Long - 3.5K
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- Drop - 4 Inch
- Dexter
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: What Gauge Wire Is Required On a 7-Way Connector
- Q&A: What are Specs of Dexter Trailer Axle # 8327812-I
- Article: Most Popular Wheel Bearings
- Q&A: What is the Minimum Space Between Tires on a Tandem Axle Trailer
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Should I Install an Axle Flip Kit While Changing Leaf Springs?
- Q&A: Can Axle Be Ordered with Loose Spring Seat Perches?
- Q&A: Testing a Vehicle Side 7-Way Trailer Connector for Proper Function
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub