Dimensions for Installing Rhino Rack Square Bar Roof Rack on 2012 Chevy Malibu

Question

Question:

I have a 2012 Chevy Malibu naked roof I have 2500 euro series ds126b plus dk183 I need instruction on spacing the bars from door n on bar Thanks

asked by: Greg G

0

Expert Reply:

I attached a picture that shows the crossbar install dimensions needed to install the Rhino Rack roof rack part numbers # RREB126B, # RRRLKVA, # RREB-FK1, and # DK183 that you referenced.

The distance between the crossbars is 27-9/16 inches and the distance from the seam between the front and rear doors to the center of front crossbar is 8-23/32 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I highly recommend using the 68" crossbar version of the Yakima Overhaul Ladder rack item #Y01151-58 with a iKamper Skycamp 3.0 Mini Roof Top Tent. The dimensions of that tent are 55.1 x 57.5 x 13.0" which will not give you enough room on…

view full answer...

Answer 2

Algae needs sunlight and carbon dioxide to grow so since the Yakima RoadShower Portable Solar Shower #Y29VR doesn't let light in it can't grow in the main tank and since there won't be air in the semi transparent tube it can't grow.…

view full answer...

Answer 3

The best way to attach accessories to the Rhinorack Pioneer Platform is to use the Rhino-Rack Accessory Bars for Pioneer Platform Rack item #RR43137B. These bars will allow you to mount the 10 Gallon Yakima RoadShower item #Y29VR to the top of your…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

I do have a solution for you but there have actually never been any custom towing mirrors made for a Nissan Frontier and so I would be surprised if any ever come out for your 2019 Nissan Frontier. Since this is the case I recommend using the K-Source…

view full answer...

Answer 9

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 10

Yes. You will need to use everything included with the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - Black - 65" #Y01-140B-NT to install into the tracks you have pictured. The bases of the legs mount right into the…

view full answer...

Dimensions for Installing Rhino Rack Square Bar Roof Rack on 2012 Chevy Malibu

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching