Distance Between Holes of Rampage Tow Hook Kit for Jeep

Question

Question:

What is the spacing between each holes? What size is the bolt hole? Does the Tow Hook come in different colors or in chrome?

asked by: Greg R

0

Expert Reply:

The distance between each bolt hole is 1-3/8" on center and for chrome you'd want part # RA7505 instead of the black part # RA7605. Hole size is 3/8 inch diameter.

expert reply by: Jameson C

0

Answer 1

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 2

I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to…

view full answer...

Answer 3

The stoplight switch #RM-751490 and the monitor light that's included in the Demco SBS Stay-IN-Play DUO Supplemental Braking System #SM99251 do the same job, so you wouldn't need it if you decided to go with the Stay-IN-Play DUO. The…

view full answer...

Answer 4

There have not been any major changes to the Stay-In-Play system since 2016, so I believe it certainly would be worthwhile (and a $$$ saver) to remove the major parts from the now-wrecked car. Provided you can get that done for a reasonable cost.…

view full answer...

Answer 5

There currently isn't a compatible Blue Ox base plate for your 2022 Jeep Wrangler Sahara. There is however the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 which is a compatible fit (standard factory bumpers). These base plates have a…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

In order to add a 7 way connector on you 2020 Jeep Wrangler JL you'll need to start by adding a 4 way trailer connector like the Tekonsha #118786, which gives you the connections needed to install a 7 way connector. Once you've installed the…

view full answer...

Answer 8

Yes, the Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR is a confirmed fit for your 2020 Jeep Wrangler Unlimited and would plug into your tail lights to transfer the lighting signals from your motorhome to the tail lights of the Jeep…

view full answer...

Answer 9

You will first want to check the fuses on your tow vehicle. Some vehicles could have fuses for operating the turn signals and brake lights of a towing package. You will want to check if they are installed and working properly. The next thing is to…

view full answer...

Answer 10

The Curt T-Connector Custom Vehicle Wiring Harness with 4 Way Flat Trailer Connector item #C96JR will allow you to connect the taillights on your tow vehicle to the taillights on your 2021 Jeep Wrangler. This will allow you to control your Jeep…

view full answer...

Answer 11

The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR is designed to plug into select Jeep Wrangler's and Gladiators in order to display a motorhome's traffic signals through the taillights on the Jeep to remain street legal. What…

view full answer...

Answer 12

The Demco SBS Stay-IN-Play DUO Supplemental Braking System part #SM99251 will pull power directly from the towed vehicles battery therefore the Towed Vehicle Battery Charge Wire Kit for Demco Supplemental Braking Systems part #DM66VR is recommended.

view full answer...

Distance Between Holes of Rampage Tow Hook Kit for Jeep

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching