Troubleshooting Brake Assemblies of 2002 Exiss XT400 that Buzz But Dont Activate
Question:
I’m hearing a buzzing noise at the axels when i depress the manual brake lever on brake controller. But I don’t think the magnets ?? are working
asked by: Jamie C
1
Helpful Expert Reply:
It's very possible your assemblies are activating like they are supposed to but the adjustment of the assemblies needs to be tightened so that the brakes will activate like they need to. This is a very common issue actually.
You will adjust the brakes using that wheel until there is a slight but constant drag of the shoe pads on the drum. I have included a link to a video and at about the 4:39 mark our installed begins adjusting the brakes.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Article: Trailer Lighting Requirements