Pulling Fuses to Flat Tow a 2019 Chevy Sonic
Question:
I read I have to pull fuses to tow my 19 Sonic. Is this right? Which ones and is there a better way to do it?
asked by: Gloria
Expert Reply:
From my research you're correct, fuses need to be removed in order to flat tow your 2019 Chevy Sonic. It sounds like the same is true for the 2018 model as well.
You can remove them and insert them manually each time you tow or we sell fuse bypasses from Roadmaster called the FuseMaster. The FuseMaster installs permanently in the Sonic and makes "removing" the fuse as easy as flipping a switch. This bypasses the fuse without actually having to take it out each time you tow.
If your Sonic is not a keyless access model you only need to remove one fuse; the DLIS FUSE 1 in the instrument panel fuse block. The FuseMaster to make this easier is part # RM76511.
If you do indeed have the keyless access model Sonic then instead you need to remove four fuses and you can use three FuseMaster bypasses for them. Use two of part # RM76511 for the F07 and the DLIS 1 fuses and part # RM76512 for both the BCM1 and BCM2 fuses which are in the passenger compartment fuse block. You only need one # RM76512 FuseMaster for both of these fuses.
Products Referenced in This Question
Roadmaster FuseMaster Fuse Bypass Switch for Towed Vehicle - (2) 20-Amp ATM Mini-Fuses
- Tow Bar Wiring
- Bypasses Vehicle Wiring
- Fuse Bypass
- Custom
- Mini Fuse
- Engine Compartment
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster FuseMaster Fuse Bypass - 13" - 20-Amp Mini-Fuse
- Tow Bar Wiring
- Bypasses Vehicle Wiring
- Fuse Bypass
- Custom
- Mini Fuse
- Engine Compartment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Shop: Blue Ox Fuse ByPass Switch for Towed Vehicles - ATM Mini-Fuse - 13" Long
- Shop: Roadmaster FuseMaster Fuse Bypass - 13" - 20-Amp Mini-Fuse
- Shop: Base Plate for Tow Bar
- Shop: Hook Probe Circuit Tester
- Shop: Curt 7-Way to RV Socket LED Circuit Tester - Vehicle End
- Shop: LCD Digital Circuit Tester
- Shop: Performance Tool Crimping Pliers - 10 to 22 AWG Wire - 9-1/2" Long
- Video: Performance Tool Hook Probe Circuit Tester Review
- Video: Blue Ox Fuse ByPass Switch Installation - 2011 Honda CR-V
- Video: Roadmaster FuseMaster Fuse Bypass Switch Installation - 2015 Chevrolet Sonic
- Video: Review of Blue Ox Tow Bar Wiring - Bypasses Vehicle Wiring - BX88272
- Video: Review of CURT Electrical Tools - 7-Way LED Circuit Tester - C73NR
- Video: Performance Tool LCD Digital Circuit Tester Review
- Shop: Blue Ox Base Plate Kit - Removable Arms
- Search Results: hitch extender for bike racks
- Search Results: thule 4 bike platform bike rack
- Search Results: saris bike rack
- Article: How to Choose a High-Low Adapter
- Video: Installation - Blue Ox Base Plate - 2020 Chevrolet Sonic
- Shop: Trailer Hitch
- Q&A: Does DLIS Fuse Still Need to be Removed on 2012 Chevy Sonic if Magnetic Lights are Used for Towing
- Q&A: Parts Needed to Flat Tow a 2012 Chevrolet Sonic
- Q&A: Recommended Flat Towing Setup for a 2014 Chevy Sonic
- Q&A: Roadmaster Battery Charge Line Kit for Towed Vehicles & 2021 Chevrolet Equinox
- Q&A: How to Prevent Steering Wheel From Locking Up When Flat Towing 2017 Chevy Sonic
- Search Results: charge line
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: base plates
Robert K.
9/4/2020
I just purchased fusemaster j-case fuse 76517 fuse lock out switch. The switch is a rocker switch. How am I supposed to know which way it has been switched? It returns to center both ways, and dont tell me you sent labels. That does no good unless the switch stays pointed at a label.