Will the Draw-Tite Trailer Hitch # 75338 fit on a 2007 Grand Cherokee Rocky Mountain Edition
Question:
Please let me know if this part will fit 2007 jeep grand cherokee rocky mountain edition. Thanks.
asked by: John
Expert Reply:
Yes, the Draw-Tite, part # 75338, will fit your Rocky Mountain Edition Grand Cherokee.
You may to allow a bit more time for installation because the Rocky Mountain Edition, may include a rear tow hook that would interfere with the hitch. If this is the case, you will need to permanently remove the tow hook. I have included a link to the instructions for you to review.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included to the right that explains how to measure to choose a ball mount to tow the trailer level.
For trailer wiring you can use # 118425. I have included links to videos showing installation of the hitch and wiring for you.
![Bob G](https://images.etrailer.com/static/images/catg/people/287_tn.jpg)
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- No Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Install a Brake Controller on a 2006 Jeep Grand Cherokee with Aftermarket 7-Way
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Parts Needed to Flat Tow a 2022 Jeep Gladiator
- Q&A: Hitch Extender that is At Least 3-1/2 Inches Deep From Pin Hole to Inside Receiver Tube
- Article: What Do I Need To Tow A Trailer?
- Article: My Trailer Hitch Doesn't Fit
- Article: Best Bike Racks for Electric Bikes
- Article: Most Popular Wheel Bearings
- Article: Brake Controller Installation: Starting from Scratch
- Article: Rooftop Cargo Carriers
- Q&A: 2,200 lb Axle Replacement System for Triton Snowmobile Trialer
- Q&A: Wiring Diagram for Trailer Breakaway Kit
- Q&A: Comparing the Curt Spectrum Brake Controller to Redarc Tow-Pro Elite
- Q&A: Replacement Trailer Axle For Dexter #9 Torflex 2,200LB Torsion Axle