Replacement Shroud for Coleman RV A/C 7330B7302

Question

Question:

I am looking for a replacement A/C shroud for a Coleman model #7330B7302 13,500 btu roof unit. The serial# is 029835512. It is from a 1998 Prowler 30-5Z 5th wheel camper. What would you recommend.

asked by: Rick R

0

Expert Reply:

I confirmed with my contact at Coleman-Mach that the MaxxAir TuffMaxx Replacement Shroud part # MA00-325001 will fit your Coleman RV Air Conditioner Model Number 7330B7302. This is the only shroud we have available for this unit. It is also a bit more durable than the shroud original to the air conditioner.

expert reply by: Conner L

0

Answer 1

I was unable to find the dimensions of that exact model number, but it is a Coleman-Mach AC and based on similar model numbers the most likely correct shroud is the following: - MaxxAir TuffMaxx Replacement RV Air Conditioner Cover for Coleman-Mach…

view full answer...

Answer 2

The the MaxxAir shroud part #MA00-325001 is a fit for the Coleman Mach, Mach 1, Mach 3 and Mach 15 models and mounts like the original and includes mounting hardware and instructions. Mach is an entire model line of Coleman air conditioners and Mach…

view full answer...

Answer 3

The part number you mentioned refers to an older Coleman-Mach AC but I wasn't able to track down any specific dimensions or what generation it belonged to within this line. The best option we have available is the MaxxAir TuffMaxx Replacement…

view full answer...

Answer 4

You can easily replace the thermostatically controlled RV ceiling fan you have in your 1999 Holiday Rambler Endeavor 37WDS with one that does not have that feature. We have the Ventline Ventadome Trailer Roof Vent part #V2094SP-28 which fits the…

view full answer...

Answer 5

That part number corresponds with a Coleman Mach AC unit so for a replacement shroud the MaxxAir Replacement part #MA8335A5261 that you referenced would fit and work great.

view full answer...

Answer 6

Yes, MaxxAir Replacement Shroud #MA8335A5261 is designed to work with Coleman Mach/RVP brand D-Series standard height RV A/C units which is exacly what your MA8335A5261 is.

view full answer...

Answer 7

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the correct fit for your 7300 series RVP. The shroud is 37 inches by 25 by 13-1/2 inches. If you don't want the two piece unit…

view full answer...

Answer 8

The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White #MA8335A5261 is the replacement I recommend for you and it has a simple installation. It will fit your Coleman AC unit.

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Shroud for Coleman RV A/C 7330B7302

Product Page this Question was Asked From

Continue Researching