Does the 3.5K Dexter Nev-R-Adjust Electric Trailer Brake Kit Come with Bearings
Question:
Can you tell me if this assembly is complete with bearings? Thank you
asked by: Robert S
Expert Reply:
The Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 comes only with the brake assemblies. For the correct bearing kit that fits hub and drum assemblies like part # AKHD-545-35-EZ-K or # 84656UC3-EZ which are used with these brakes you need Kit # BK2-100. This comes with an # L44649 bearing and matching race, an # L68149 bearing and matching race, plus a 10-19 seal with an ID of 1.719" and an OD of 2.565" as well as a cotter pin and tang washer.
I have attached installation videos for both the electric brake kit and the bearing kit that you can reference.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: Dexter Never Adjust Brakes Initial Adjustment on Tandem Axle Trialer
- Q&A: Can Trimax Puck Lock for Trailer Door Hasps be Keyed Alike
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Hubs And Electric Drum Brakes For A 2011 Airstream Flying Cloud 27FB
- Article: Trailer Tire Sizing
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Replacement Dexter Brake Assemblies for 36-19 Assemblies