Can SilverBack RV Sewer Hose Be Shortened

Question

Question:

Can this sewer hose be shortened??

asked by: Renee

0

Expert Reply:

The SilverBack RV Sewer Hose part # D04-0650 can be shortened but the bayonet style fittings will not properly fit the hose anymore since the hose is designed with the fittings preglued to the ends of the hoses. I confirmed this with SilverBack. They do not recommend shortening it but you may be interested in the 10 foot long version part # D04-0675. I have attached a link of all of the other drain hoses we carry.

expert reply by: Heather A

0

Answer 1

We recommend using 2 of the Ultra-Fab Chock and Lock Wheel Stabilizer #UF21-001060 when your trailer is parked as that will keep it more stable on both sides. You can find a kit of 2 with part #UF21-001070. Please note that you also need to add the…

view full answer...

Answer 2

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Answer 3

It really comes down to the thickness of the door on your 1967 Airstream. From my research it looks like the 66-68 Airstreams had a thicker door which was over 2-1/4" thick. If you have the thicker door the only option would be to use one of the…

view full answer...

Answer 4

We actually got a chance to test out a few of our cargo bags, including the Curt #C18211 just the other day. The bag itself measures 56" long x 22" wide x 21" tall. We found it to be extremely roomy we were able to fit about 5 duffel…

view full answer...

Answer 5

Installing the Draw-Tite #76199 Class III hitch on your 2021 Alfa Romeo Stelvio will prevent the liftgate sensors under the center of the bumper from picking up movement, but if you wave your foot a few inches to one side or the other of the hitch…

view full answer...

Answer 6

While we do not carry the JRP1007B bulb we did find the LED Bulb #ARC48FR to work as a replacement for it.

view full answer...

Answer 7

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…

view full answer...

Answer 8

For front leg replacements for the Lippert Ground Control systems we have the part #LC362485 for just the leg portion or the part #LC305340 for a leg with the foot and motor as well. These will be the same length as what you have currently.

view full answer...

Answer 9

No, the Drop Leg for Lippert Power Jack #LC405217 is designed to fit the Lippert Electric Trailer Jack with Footplate #LC285318, and does not work with your Lippert Ground Control 3.0. The drop leg may physically fit, however there is a notch cut…

view full answer...

Answer 10

In order to get the correct replacement drop leg you will need to know the manufacturer and model of your current landing gear because they do need to match in order to keep your Heartland Sundance level. For example, the Replacement Lead Jack w/…

view full answer...

Answer 11

For the hydraulic Level Up system you have on your 2018 Montana the replacement jack legs for all positions according to Lippert is the part #LC36VR.

view full answer...

Answer 12

The SilverBack RV Sewer Hose part #D04-0650 can be shortened but the bayonet style fittings will not properly fit the hose anymore since the hose is designed with the fittings preglued to the ends of the hoses. I confirmed this with SilverBack. They…

view full answer...

Can SilverBack RV Sewer Hose Be Shortened

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching