Running Light Circuit Does Not Work on a 2008 Nissan Xterra with Factory Tow Package
Question:
i have a 2008 nissan xterra and have purchased the factory wire package for the trailer connection only problem is when i test it it still shows i have no running loghts everything else is working the left and rigt turn and brake lights and i ahve power at a post called battery positive mnot sure what else needs to be done.this tow wire harness has the large round 7 way rv plug and all my trailers have a 4 way flat any help will be greatly appriciated
asked by: Larr
Expert Reply:
If your 2008 Nissan Xterra came with a factory tow package and you wanted to convert the 7-Way to a 4-Way, you would use # C56225. However, if you are testing the 7-Way with a circuit tester like # PTW2993 and the running light circuit is not functioning, you will want to check the fuses/relays associated with the tow package to see if something needs to be replaced.
You can use the vehicle owner's manual to located all of the fuses and relays that are related to the tow package. Some may be under the hood and others may be inside the cab of the vehicle.
Also, it could be that the tester that you are using does not offer enough draw on the electrical system to engage it. But, connecting a trailer to it would. If you wanted to keep the 7-Way on the Xterra you could just use a 7-Way to 4-Way adapter like # PK12716.
Products Referenced in This Question
Replacement Wiring Harness for Tow Ready Nissan Vehicle Wiring Harness
- Accessories and Parts
- Custom Fit Vehicle Wiring
- Wiring Harness
- Tow Ready
more information >
Pollak 7 Pole to 4 Way Connector Adapter
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 7 Round - Blade
- Plug Only
- 4 Flat
- Pollak
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Must Have RV Accessories that Will Make or Break Your Trip
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Is Bow in 3,500 lb Trailer Axle Enough Camber for Loaded and Unloaded Trailers
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Are Relays Required to Activate the Trailer Wiring Harness on a Nissan Frontier
- Article: Trailer Wiring Diagrams
- Q&A: How to Replace a 4-Way Trailer Connector with 8 Wires
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Replacement Brake Shoes for Dexter 12k Axles
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Nissan Tow Package Wiring Harness 118266/118267 - 7 Way Harness Installed and Electric Brakes Locked
- Article: Trailer Hitch Installation Tips