What Spindle Should be Used to Fit in Axle Tubing of 1-7/16 inch And 2,000 lb Capacity
Question:
Trying to make a small 2000 LB axle- can I use 13 gauge 1/8inch or 3/32inch tube thickness round tubing that I have? What spindle will I need for the inside diameter being 1 and 7/16 inch?
asked by: Doug H
0
Expert Reply:
The best spindle option we have is the 2,000 lb axle spindle part # TRU94FR which has an outer diameter of where it would install in an axle of 1.25 inches. As far as the diameter of tubing to use for the axle we really can't recommend that and be able to ensure you'd have the capacity you'd need.
expert reply by:
Jameson C
0
Products Referenced in This Question
BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Choose Correct Axle Placement for Tandem 7K Axles with Slipper Leaf Springs
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Most Popular Wheel Bearings
- Q&A: Spindle Recommendation for a Square 2x2 Axle
- Q&A: Removing and Replacing Trailer Spindles
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: Can Bias Ply Trailer Tires Be Used On Long Trips
- Article: Where to Position the Trailer Axle?
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern