Which Yakima MightyMounts Will Fit on a 2011 Audi Q5 with Factory Crossbars

Question

Question:

Which Mighty mount part number will work with a 2011 Audi Q 5 with factory cross bars?

asked by: Clark S

0

Expert Reply:

Many Yakima roof mount accessories are listed as a direct fit to the factory crossbars on a 2011 Audi Q5. But, if a MightyMount is needed, you would need Universal MightyMount, # Y03590. I have included a link to the installation details for you.

expert reply by: Michael H

0

Answer 1

We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. I included a video…

view full answer...

Answer 2

It depends on your bike mount and brand. Yakima has their Universal Mighty Mounts #Y03590 that should help with most of your Yakima carriers. Thule has their Xadapt series: #Xadapt1 and #Xadapt2 for crossbars that have a t-track in them. If not, they…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Which Yakima MightyMounts Will Fit on a 2011 Audi Q5 with Factory Crossbars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching