Sway Bar Recommendation for 2018 Winnebago 26 Intent to Improve Ride Quality
Question:
Thanks for helping in advance.. I already did the cheap anti sway bar improvement by using the 2nd bolt hole in both the rear and front sway bar. That did help. But, this unit is still a white knuckle unit with cross winds and semis passings. I also did install the Roadmaster steering stabilizer, which did help also..... But as I mentioned.... this unit still needs help What do you suggest? Thanks
asked by: Dennis S
Helpful Expert Reply:
Your 2018 Winnebago 26 Intent is built on a Ford F-53 chassis that is somewhat notorious for being hard to handle on the highway. The biggest improvement you'll make is with a new rear sway bar. Which for that you'd want the Roadmaster bar part # RM-1139-146 which is a confirmed fit.
Next biggest improvement is with a front sway bar which the part # RM-1139-148 you referenced is the correct fit. With these two bars and your current stabilizer you'll have a much better ride quality.
Products Referenced in This Question
Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter
- Anti-Sway Bars
- Anti-Sway Bar
- Rear
- 1-1/2 Inch Diameter
- Steel w Polyurethane Bushing
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Front Anti-Sway Bar - 1-3/4" Diameter
- Anti-Sway Bars
- Anti-Sway Bar
- Front
- 1-3/4 Inch Diameter
- Steel w Polyurethane Bushing
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: Torque Specifications for Rear U Bolts on F53 Chassis Motorhome
- Q&A: Comparison Between Roadmaster # RM-1139-140 and # RM-1139-148 Anti-Sway Bars
- Q&A: Comparing Roadmaster and Hellwig Sway Bars for Motorhome Built on E-450 Chassis
- Q&A: Troubleshooting A Roadmaster Anti-Sway Bar Installation On A 2014 Winnebago Vista Motorhome
- Q&A: Installing Extended U-bolts for Roadmaster Rear Anti-Sway Bar 1139-143 on 2004 F-53 Chassis
- Q&A: Installation of Frame Brackets of Roadmaster Front Anti-Sway Bar on 2004 Workhorse W-Series Chassis
- Q&A: Recommendation for Roadmaster Front and Rear Sway Bars for a 2005 Fleetwood Bounder 34F
- Article: Performance Chips and Modules
- Article: Brake Controller Installation: Starting from Scratch
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Measure for Trailer Hitch Drop
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure