Timbren Axle-Less Suspension System Compatible with Jeep for Matching Trailer
Question:
Just to verify, this axle ASR35HDS05 will work with Kodiak Trailer Hub for 5,200-lb to 6,000-lb Axles - 6 on 5-1/2 - Stainless Steel Item # KH42655S
asked by: Eric B
Expert Reply:
For the Timbren Axle-Less kit compatible with the bolt pattern of 5 on 5 like a Jeep, you would need the 2,200 lb capacity # ASR1THDS03. The spindles on the Timbren system are a little larger than their thru-axle counterparts, so the 3,500 lbs # ASR3500S06 will only fit larger hubs that won't have the bolt pattern you seek.
Using # ASR1THDS03, you can then use the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5 # AKIHUB-550-35-EZ-K or the Trailer Hub and Drum Assembly # AKHD-550-35-EZ-K.
If you have the 5-on-5.5 inch like you stated, then you would need hubs # AKIHUB-555-35-EZ-K or hub/drum # AKHD-555-35-EZ-K. I've attached an article to help you measure your bolt pattern to confirm which you have.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt Flange - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 15123 and 25580
- Race 25520 and 15245
- 6000 lbs Axle
- etrailer
more information >
Kodiak Trailer Hub for 5,200-lb to 6,000-lb Axles - 6 on 5-1/2 - Stainless Steel
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Kodiak
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.250 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will Brake Assembly with 5-Bolt Mounting Pattern Fit 4-Bolt Mounting Pattern
- Q&A: Help Determining Wire Colors of Trailer Wiring for Installing New 7-Way
- Q&A: Why is There a Wire Color Differnce Between 7 Way Traditional vs RV Standard
- Q&A: 2020 Aliner Expedition Suspension Upgrade for Dexter 3,500 lb Torsion Axle
- Q&A: How to Identify Trailer Axles
- Q&A: Is There Trailer Axle Over Under Kit that Could Fit 5x8 Utility Trailer
- Q&A: Axel Flip Lowes 5 x 8 utility trailer
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight
- Article: Overview of Lubricating Grease
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Raise Your Travel Trailer Height
Eric
4/30/2019
After taking measurements of my military M1101 trailer, I think this axle would work very well but one with a 2 inch lift would work better. Is there such a beast?