Is There a Shorter Shank Option for Curt Fixed Ball Mount with 2 Inch Drop
Question:
1. What is the thickness of the ball mounting flange? That is, how thick is the piece through which the ball shank s? Im trying to calculate whether my ball shank is long enough, or whether I need to buy a new one. 2. Does this mount come without the ball? 3. Is there a shorter one less than 7.5 with the same drop and rise? Thanks!
asked by: Paul K
Helpful Expert Reply:
The Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs # C45036 does come with the hitch ball installed. The ball platform is 3/4 inches thick which is standard with a 1 inch diameter hole. This is the shortest option for that rise and drop. There is a lower rated option in # C45131 but it is only due to the smaller hitch ball that is 1-7/8 inch diameter. It still uses the same ball mount and just changes the hitch ball.
There are longer options that are similar but nothing shorter. The most similar option without a ball is the Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs # C45030 which has a slight drop increase to 2-1/4 and 1 inch rise when inverted. The length is 7-5/8 inches.
Products Referenced in This Question
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Curt Fusion Ball Mount for 2" Hitches - 1-7/8" Ball - 2" Drop - 5,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 5000 lbs GTW
- Class III
- CURT
more information >
Product Page this Question was Asked From
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Steel vs. Aluminum Ball Mounts
- Article: My Trailer Hitch Doesn't Fit
- Q&A: How to Measure the Rise/Drop of a Ball Mount
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Best Way To Carry a Rooftop Tent On a 2024 Kia Sportage?
- Q&A: Installation of Curt Trailer Hitch on a 2022 Kia Telluride
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: What Hitch Do You Recommend for a 2024 Toyota RAV4 Prime?
- Q&A: Recommended Spare Tire and Tire Carrier for Boston Whaler Boat Trailer
- Q&A: Replacement Trailer Tires Size 7.50-16LT Load Range F
- Article: How Level Should a Tow Bar Be When Flat Towing