Finding Return Line on Toyota Tundra to Install Derale Transmission Cooler
Question:
I’m installing this and not sure which line is my return line.
asked by: Margie W
0
Expert Reply:
When installing the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13504 you can identify the return line on your Tundra by first starting the truck and putting the transmission in drive for about 10 seconds. Then put the truck in park and turn the ignition off.
With the truck off you will then just want to feel both the transmission lines. The cooler of the two lines is your return line which is what you will use to install the cooler.
expert reply by:
Chris R
0
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Full-Size Truck
- SUV
- Standard Mount
- 11W x 12T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Ramp Door Spring Kit for 85 lb Horse Trailer Door
- Article: Transmission Cooler
- Q&A: Recommendation for a Transmission Cooler with Max Cooling Capacity for a 2007 Chevy Avalanche
- Q&A: Availability of a Transmission Cooler for a 5.3 Liter 2007 Chevy Suburban
- Q&A: Transmission Temperature Goes Up and Engine Loses Power on a 2002 Ford F-350 Diesel
- Q&A: Is There a Lock For Flint Hill Goods Cargo Carrier & Ramp FHG69ZR
- Q&A: Recommended Transmission Cooler for 2012 GMC Yukon
- Q&A: Why Route Transmission Fluid First Through the Factory Cooler then Through Supplemental Cooler
- Article: Brake Controller Installation: Starting from Scratch
- Article: My Trailer Hitch Doesn't Fit
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: RV Roof Types: What Type of Roof Does My RV Have?