Parts to Convert a 4-Way Flat Trailer Connector to a 6-Way Round on a 2008 Jeep Rubicon Unlmited
Question:
How do a hook up a etectric trailer brake accuator to a 2008 Jeep rubicon unlimited 4 door. it only has a 4 pin flat plug and i need to go to a 6 pin round.
asked by: Eric
Expert Reply:
We have a brake controller wiring kit, part # ETBC6, that will allow you to convert your 4-Way to a 6-Way round. This kit includes everything you need to convert your 4-Way and install a brake controller.
You would connect your 4-Way to the 4-Way on the back of the ETBC6. Next you would ground the white wire. You would extend the blue wire up to the cab for the brake controller output. The red wire would then be connected to your reverse light circuit or run up to the battery for a 12V power lead, depending on the trailer.
You would also need a brake controller, like the Prodigy P2 part # 90885. You would wire the blue wire on the controller to the blue wire on the 6-Way. The white wire on the controller is run to the negative terminal on the battery and the black wire is run to the positive terminal on the battery. The red wire is then connected to the stop light circuit so the controller knows when you hit the brakes.
I have added links to a help page and a video that should be pretty helpful. They are with the ETBC7 kit, but you do not need the 7th wire.
Products Referenced in This Question
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 6-Way and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Pollak 6-Pole, Round Pin, Plastic Trailer Wiring Socket w/ Rubber Boot - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 6 Round
- Pollak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Q&A: Troubleshooting Brake Lights Overriding Tow Bar Lighting Turn Signals
- Q&A: Comparing etrailer and Blue Ox Baseplate Kits For A 2023 Jeep Gladiator
- Q&A: Can Curt Tow Bar Lighting Kit for 2023 Jeep Gladiator Install with Trailer Wiring
- Article: Best Vehicles to Flat Tow Behind an RV
- Q&A: Parts Needed to Flat Tow 2023 Jeep Gladiator
- Q&A: Recommended Plug and Play Flat Towing Wiring Harness for a 2020 Jeep Wrangler
- Q&A: Does Blue Ox Base Plate Kit part # BLU85CR Have Safety Chain Connection Point
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does Hopkins 4-Way Tow Bar Lighting Kit have Charge Line for Towed Vehicle Battery
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Performance Chips and Modules
- Article: How to Choose a High-Low Adapter