Curt True Course Compatibility with 2017 Ford F-350 and Triple Axle Toy Hauler

Question

Question:

I have a 2017 Ford f350 and a triple axle toy hauler. With the Curt True Course work to help control sway? How does it work?

asked by: George

0

Expert Reply:

The Curt True Course Electronic Sway Control System # C94VV is compatible with your triple axle trailer. The system uses a solid-state gyroscope to sense sway and gps to monitor speed. It then will determine the brake force needed to correct the sway at that speed and activates all your trailer brakes simultaneously to the proportional amount to correct that sway.

It is self-calibrating so there are no adjustments needed. You simply mount it to the A-Frame of your trailer and plug it in to your vehicle 7-way connection then plug the trailer 7-way into the Hayes unit.

expert reply by: Jason S

0

Answer 1

We have bike racks like the can attach to the top of a hard tonneau cover like the very cost-effective Hollywood Racks Truck Bed Bike Carrier #HRT970. This is a bolt-on product that holds your bike at the fork that would require you to drill…

view full answer...

Answer 2

The Blue Ox #BXW1000 SwayPro is designed for trailers with tongue weights ranging from 750-1000 lbs. If the fully loaded and ready to pull trailer tongue weight of your travel trailer is less than 750 lbs, you'll have a pretty rough ride and…

view full answer...

Answer 3

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I would be happy to. To flat tow your 2017 Ford F-250 you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar item #e84ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item…

view full answer...

Answer 7

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line.…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 9

Hey David; I checked directly with Pace Edwards for you and can tell you that the rails on the Pace Edwards Switchblade Retractable Hard Tonneau Cover #PE46QJ will protrude just under 3/4" on both sides when installed on your Ford Super…

view full answer...

Answer 10

Hey Tony, thanks for writing in, and that's a really smart question. The answer is yes, the fresh water tank should be full when adjusting the 16,000 lb Equal-i-zer Weight Distribution System #EQ90-00-1600. What you want to do is have the…

view full answer...

Answer 11

The Curt True Course Advanced Bluetooth Trailer Sway Control #C94VV wins for ease of install and it does a really good job but if you were wanting the best sway control that applies the left and right brake assemblies independently the Tuson…

view full answer...

Answer 12

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...