Bearing Kit, 10 x 2-1/4 Hydraulic Brake Shoes, and Grease Cap for Dexter 3500 EZ Lube Axle
Question:
My calipers measured the brake hub id @ 2.08inch which cap fits?
asked by: John V
Expert Reply:
All of our bearing kits, like the part # BK2-100 that was referenced, only include the inner/outer bearings, grease seal, and cotter pin/washer but I can help you get the other parts that you are needing as well.
For 10" x 2-1/4" brakes we have the Redline Hydraulic Brake Shoe/Lining # BP04-120 which comes in a set for 1 wheel.
Then for a grease cap if you could let me know what your hub bore measures (to the 3rd decimal like 1.234) I can help you select the correct size cap from the linked selection. Typically grease caps with a 1.98" like the part # RG04-040 will fit 3,500 lb axles but it is always best to check.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 2080 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.080 Inch
- Bearing Buddy
more information >
Bearing Buddy Bearing Protectors - Model 2080SS - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.080 Inch
- Bearing Buddy
more information >
Bearing Buddy Bearing Protectors - Model 2080T-SS - Threaded - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.080 Inch
- Bearing Buddy
more information >
10" X 2-1/4" Hydraulic Brake Shoe/Lining (One Wheel)
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- RH
- Brake Shoes
- 10 x 2-1/4 Inch
- Redline
more information >
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.99 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
John R.
4/1/2019
My calipers measured the brake hub id @ 2.08inch which cap fits?