Upgrade Kit for Single Step Kwikee Electric Coach Step for 1996 Coachmen Mirada

Question

Question:

The plastic gear in the step is striped can you get just that replacement gear or so you have to repace the whole thing. Its a single step Kwikee 28

asked by: Dana

0

Expert Reply:

Small individual parts for an older Kwikee step motor like the one on your 1996 Coachmen are no longer available. For a Series 28 electric single step on a 1996 Coachman you'll need to upgrade the unit to current parts, according to my contact at Lippert.

If your step linkage is curved use kit Conversion/Upgrade Kit # LC379145. If the step linkage is straight then use kit # LC379769. Please compare the photos of these items to your unit to determine the correct upgrade kit.

expert reply by: Adam R

0

Answer 1

Yes, we do have the replacement control unit for Kwikee series 28 steps. - Replacement Control Unit for Kwikee Electric RV Steps #LC379146 This is the same control unit that is included in the Kwikee Steps Replacement Kit #LC379769 for 28, 31, 37,…

view full answer...

Answer 2

I spoke with Lippert about your Kwikee 28 Series Step and they informed me that the correct control module is the Replacement Control Unit for Kwikee Electric RV Steps part #LC379606 and the correct motor is the Replacement Motor with Mounting…

view full answer...

Answer 3

Since you have a Kwikee Series 28 step on your motorhome the correct motor upgrade kit is the part #LC379769 that you referenced.

view full answer...

Answer 4

For your Lippert Series 26 step, I recommend the Lippert Components Kwikee Step power switch and door kit #LC369311 and then using controller #LC379146. Then you will also add the Lippert Components Kwikee Step Replacement Light #LC379414. This…

view full answer...

Answer 5

The Motor Upgrade Kit #LC379769 will give you a new motor, gearbox, control unit, switch kit and hardware for your series 28 Kwikee step on your 1994 Winnebago Elante motorhome. The motor will be the updated IMGL that has more torque for opening…

view full answer...

Answer 6

Since you have an older model version of the Kwikee Series 28 RV steps the solution you need for replacing the control module is the part #LC379769 which is an upgrade kit that includes the new motor and gearbox since the older style module is not…

view full answer...

Answer 7

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Answer 8

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

In order to match up the wheel studs for your Reliable 1206 hub, we'll need to know the full dimensions of the wheel stud you're replacing. In addition to the total length of the stud and its diameter and thread pitch, we'll…

view full answer...

Answer 11

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

view full answer...

Answer 12

Unfortunately we do not have a way to replace the keys without knowing the key number for the lock. If they happened to have written down the key number from the lock then we will be able to get you a replacement. The etrailer Trailer Hitch…

view full answer...