Key Replacement for Sears Sport 20SV Luggage Carrier # 2856

Question

Question:

Hi - Was wondering about a key replacement for sears sport 20 sv luggage carrier #2856?

asked by: Holly

0

Expert Reply:

For your Sears Sport 20SV Luggage Carrier you will want the Replacement Key for Thule and Sportrack Racks and Carriers # THKEYN2856.

expert reply by: Jason S

0

Answer 1

You sure can get a replacement key 2856 for your Sears X-Cargo Box! What you need is the Replacement Key #THKEYN2856; you may want to order a couple extra just to make sure you have some spares handy.

view full answer...

Answer 2

The correct replacement key for your Sears X-Cargo Sport 20 cargo box is part #THKEYN2856. Thule made the cargo boxes for Sears, so that is why they make the replacement keys.

view full answer...

Answer 3

We do offer a replacement Spring Hinge for the Sears X-Cargo Sport-20 rooftop boxes, part #TH14933. The part #TH14936 you referenced is not an ideal fit for your Sears X-Cargo Sport-20 due to the stiffness of the spring.

view full answer...

Answer 4

Thank you for providing the photo of your cargo carrier information. The Sears Cargo Carriers were manufactured by Thule and they offer replacement keys based on the reference number on the existing lock mechanism. If you can tell me the numbers…

view full answer...

Answer 5

The Sears XCargo rooftop carriers were made by Thule and so you can use the Thule u-bolt type kit #TH05603. We also offer locks and keys for cargo boxes like your X-Cargo in case you ever need either of these items. A lot of people that use rooftop…

view full answer...

Answer 6

We have replacement keys for your Sears X Cargo 20 series cargo carrier. In order to get the correct one you will need to know the key number of your current setup. If you do not have a key to get the part number off of, the lock on the cargo box…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Key Replacement for Sears Sport 20SV Luggage Carrier # 2856

Product Page this Question was Asked From

Continue Researching