What Backup Camera/Monitor Do I Need for the Factory Wiring on my 2018 Keystone Montana
Question:
Camper came with pre wired camera but no monitor. Can I purchase monitor that is compatible to camera. Also I would like the option of installing multiple cameras. Thank you
asked by: Marvin N
Expert Reply:
If my memory serves me correctly, the 2018 Keystone Montana came pre-wired with a backup/observation camera mount; the camera, monitor, and data cables would then need to be purchased separately. This is the case for all trailer's that came prewired for a Furrion backup/observation camera system. Therefore, in order to obtain these components you would need the Furrion RV Observation Camera System part # FOS43TASF for the 4.3" screen or part # FOS05TASF for the 5" screen. In order to add an additional camera to the 5" monitor you can use the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL for up to four total cameras.
Unfortunately, the monitor and data cables are not offered separately from the above kits therefore this will be your only option to use the Furrion pre-wired camera mount that came on your Keystone Montana. I have attached a review video of the main and side camera systems for you as well. I really wish we could sell you just the monitor, camera, and data cables but Furrion simply does not allow for this.
Products Referenced in This Question
LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems - Qty 2
- Accessories and Parts
- RV Camera System
- Camera
- Side Camera
- Right Side Camera
- Left Side Camera
- Black
- Furrion
more information >
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen
- RV Camera System
- Backup Camera
- Observation Camera
- Built-In Microphone
- Touch Screen
- Anti-Glare
- Mirrored Image
- Night Vision
- Motion Detecting
- Waterproof
- Wireless Signal
- 120 Degrees
- Dashboard Pedestal Mount
- Suction Cup Mount
- Below Rear Clearance
- Side Marker Lights
- 5 Inch Display
- 1 Camera
- Furrion
more information >
Product Page this Question was Asked From
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen
- RV Camera System
- Backup Camera
- Observation Camera
- Built-In Microphone
- Touch Screen
- Anti-Glare
- Mirrored Image
- Night Vision
- Motion Detecting
- Waterproof
- Wireless Signal
- 120 Degrees
- Dashboard Mounting Bracket
- Suction Cup Mount
- Below Rear Clearance
- 4.3 Inch Display
- 1 Camera
- Furrion
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: LED Trailer Clearance or Side Marker Light with Reflex Reflector - 2 Diodes - Red Lens
- Q&A: What Circuit Activates The Pre-Wired Furrion Backup Camera In Keystone Montana
- Q&A: Wiring The Furrion Vision S Wireless RV Backup Camera System To The Running Lights
- Q&A: Camera Kit for RV that has Furrion Bracket Mounted on Rear # FRCBRKT-BL
- Article: Trailer Maintenance Schedule
- Q&A: Location of Heating Element on Atwood GC6AA-10E Water Heater
- Article: Trailer Wiring Diagrams
- Q&A: Troubleshooting Surge Brakes Locking Up When Moving Forward
- Q&A: Best Weight Distribution for a V-Nose Trailer with Short Frame Distance from Coupler to Body
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What Stops Porpoising on Tow Vehicle that is Using Weight Distribution with Trailer
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Choose a Bike Rack for a Motor Home or RV
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Which Sway Control Hitch is Right For Your Trailer?