Mechanism that Holds Philips Door Slider Closed all the Time

Question

Question:

My slider is still intact....I just need the bracket it nestles into when its closed. Is that sold separately? Or all together?

asked by: Matt D

1

Helpful Expert Reply:

What you are looking for is the Replacement Handle for P-Series RV Screen Doors # A77027. This is the broken piece I see in the picture you attached and is the mechanism that holds the slide fully closed. This fits the Philips brand that you said you have as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Most likely you hit a strange bump and it happened to flip your shackle the wrong way. If you use a floor jack to jack up the rear axle it will go back to the right orientation. If it happens repeatedly that would indicate your leaf springs are too…

view full answer...

Answer 2

Shackle links can flip when the trailer is unloaded since there isn't enough weight to keep them in proper position, and while a new, shorter equalizer may help, the easiest thing to check is the shackle links. Shackles that are too short can…

view full answer...

Answer 3

As you have a Coleman Mach system currently you can use the Furrion Chill AC units from the list below. These will simply replace only the rooftop units and the controls and thermostats you currently have in place with control the new AC's. 13.5K…

view full answer...

Answer 4

Yes, you will be able to use the Furrion Chill HE RV Air Conditioner System #FR87FJ to replace all your Coleman MACH components. The thermostat will be able to control your furnace and run off the thermostat wiring your Coleman AC uses.

view full answer...

Answer 5

The Furrion Chill HE RV Air Conditioner System #FR87FJ only needs 1 thermostat to control both AC units. There is a controller that goes from the thermostat to each AC unit which is why they can be operated independently from a single thermostat.…

view full answer...

Answer 6

It sounds like you are talking about door slider #LC234101. This is the only 12 x 12 inch Lippert door slider we have. It isn't all that clear though; it is considered frosted.

view full answer...

Answer 7

The Wheelmasters valve stem extenders part #WM8029 would work great with the TST TPMS for RVs part #TST-507-FT-4-C. These have a slight angle to them which puts the valve stem in an easier to access location.

view full answer...

Answer 8

The lid for the Replacement Wooden Toilet Seat #DOM83FR that fits on a Dometic 310 RV Toilet #DOM57FR tapers to be narrower at the top of the lid. So it will be slightly narrower than the seat itself. I have included dimensions that show the widest…

view full answer...

Answer 9

In order to find the correct screen door slider you just need to measure the track width which is the distance between the two tracks top to bottom. The Screen Door Slide part #37211185 for example is designed to fit a 12" track width. I have…

view full answer...

Answer 10

We do have what you are looking for with the Lippert Screen Door Slider Panel with Push-Down Knob Opener #LC239061. The dimensions of this are 12 inches wide by 9-3/4 inches tall.

view full answer...

Answer 11

The screen door slide you selected, Valterra #A77022, and all other options are shown on the linked page. In the specific size of this slide, 11-11/16 x 11-7/8-inches, all items are from Valterra and will have the same thickness dimension. Lippert 12…

view full answer...

Mechanism that Holds Philips Door Slider Closed all the Time

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching