Measurements of Mounting Blocks and Screws of Stromberg Carlson Handrail

Question

Question:

Im planning to purchase and install the Stromberg Carlson Handrail part # AC-300 on my 2018 Heartland Prowler Lynx 25 LX. You noted that the 8 mounting screws are 2 1/2 inches in length. What is the actual length or how much of the screw is seated into the sidewall of the camper?

asked by: Brian G

0

Expert Reply:

I went to take some measurements for you and found that the mounting blocks of the Stromberg Carlson Folding Handrail for RVs # AC-300 measured 2 inches and the screws, as you mentioned, are 2-1/2 inches. This means that they seat 1/2 inch into the sidewall of your camper.

I have added a link to a video review of this handrail for you to check out as well.

expert reply by: Kyle S

0

Answer 1

I confirmed with my contact at StrombergCarlson that their Lend-a-Hand Folding RV Handrail, part #AC-300, and the similar aluminum version, part #AM-200, can both fold either to the left or to the right. These two products differ in that the AC-300…

view full answer...

Answer 2

The Stromberg Carlson Rail Mate Folding Handrail for RV Steps - 38 inch - 250 pounds #AP-101 will not work for your two step Airstream trailer, because it is for a 3-4 step setup. I recommend going with The Stromberg Carlson Folding Handrail for RVs…

view full answer...

Answer 3

On the install bracket the install holes measured from center to center from top to bottom is 1 inch. From left to right on center is 1-1/2 inches. The distance from the center of the top bracket to the bottom bracket is 23-1/2 inches. The install…

view full answer...

Answer 4

I would recommend The Stromberg Carlson Folding Handrail for Fleet RVs - Stainless Steel #AC-544. The folding hand rail secures in the open position with an unique locking mechanism. The hand rail can be folded against the wall and out of the way…

view full answer...

Answer 5

Wheel-mount bike racks like the Thule T2 Pro XTR #TH83JV aren't the best options for bikes with fenders for exactly the reason you mentioned. The ratcheting hooks would come down on the fender instead of the wheel which won't provide a secure…

view full answer...

Answer 6

As you can see from the product reviews (some of them sent in after a year), the Stromberg Carlson #AM-300 grab handle you referenced is pretty highly rated by our customers. We haven't had any reports of failure. A folding grab handle with…

view full answer...

Answer 7

I spoke with my contact at Stromberg Carlson and the Lend-a-Hand Folding Grab Handle for RVs, #AC-300, uses #14 x 2 inch screws. In order to mount the handrail you will want to drill 1/8 inch pilot holes making sure that you are drilling into a solid…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 11

Yes, you do have the exact right replacement converter for your 45 amp Magnetek 6345, which is the option from Progressive Dynamics: - Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V I have added links below to…

view full answer...

Answer 12

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Measurements of Mounting Blocks and Screws of Stromberg Carlson Handrail

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching