Dimensions of the Entry Screen Door Rubber Bumper 201478

Question

Question:

What are the dimensions of this rubber screen door bumper and how does it affix to the trailer? I am looking for a similar part used on my horse trailer that has failed. It was glued on.

asked by: Diane

0

Expert Reply:

I went out to the warehouse and found that the diameter of the Entry Screen Door Rubber Bumper # LC201478 is 3/4" and it sits about 3/8" tall. It installs via the adhesive on the back of the unit. this would be similar to a glue but it really depends on what kind of glue you used. Be sure that the surface you install it on is clean and free of debris.

expert reply by: Jon G

0

click to enlarge

Answer 1

Sounds like you are looking for the Rubber Bumper part #386000 as this is a ramp door bumper, whereas the part #LC201478 that you referenced is for screen doors.

view full answer...

Answer 2

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 3

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 4

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 5

I recommend the #RS34FR to replace your current LP gas detector. This is a simple 2 wire design making for easy installation.

view full answer...

Answer 6

The Dexter 10K electric brakes #23-439 (right side) and #23-438 (left side) will have to be manually adjusted using the adjustment wheel below the magnet. To adjust the brakes you will use a small screwdriver or similar tool to turn the adjustment…

view full answer...

Answer 7

I checked directly with BOLT for you, and they confirmed for me that your 2021 Chevy Silverado is absolutely compatible with their trailer hitch locks. Take a look at the accompanying photo, and if you have the same center cut key, the correct lock…

view full answer...

Answer 8

Yes, the Bolt Trailer Hitch Lock part #BL7023582 will work for you as it is a hitch lock designed for 2-1/2 inch hitches like what you have on your GMC 3500 truck. The usable portion of this lock is 3.55 inches. Check out the picture I attached for…

view full answer...

Answer 9

The Bolt hitch lock part #BL7023582 that you referenced does fit your 2014 GMC Sierra 1500. I attached a chart that has all of the vehicle this works with. I also attached a link to a review video for this lock for you to check out as well.

view full answer...

Answer 10

We do have some LP gas detectors available, but none would be a direct replacement for your CCI 7770.2 / Pre Tell 22. From what I could find on your CCI 7770.2 / Pre Tell 22, it has dimensions of 6.25" wide x 3.9" tall. The RV Propane Gas…

view full answer...

Answer 11

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…

view full answer...

Answer 12

Atwood is no longer in business so you'd have to switch over to a new brand in order to get what you need. We currently only carry the RV Propane Gas #RS44FR (white #RS64FR) which comes with two different trims (large: 7-1/4" long x…

view full answer...

Dimensions of the Entry Screen Door Rubber Bumper 201478

Product Page this Question was Asked From

Continue Researching