Trailer Hitch and Wiring Harness for 2019 Hyundai Santa Fe
Question:
Is a hitch available for our 2019 Santa Fe? We need a hitch and wiring so we can tow our little utility trailer that has lights.
asked by: Jessica
Expert Reply:
We do have trailer hitches for your 2019 Hyundai Santa Fe, Draw-Tite # 75908 and Curt # C13195. These are identical in design and installation but I suggest the Curt # C13195 since it offers a higher tongue weight rating. Extra capacity is never a bad thing.
For a 4-pole wiring harness for the trailer lights I suggest the Curt # CU94FR which will plug in under the car on the driver's side. The picture included shows the connector that will plug in at the tow package harness under the car. I recommend using dielectric grease # 11755 to keep that connection free of corrosion.
You'll also need a ball mount and hitch ball. Ball mounts can be chosen so that the hitched trailer is level and the ball should be chosen to match the size of the coupler on the trailer. On a small utility trailer this is likely to be a 1-7/8-inch size like # 19260 or a 2-inch size like # 40038. The linked article will help you choose the right ball mount. You can also use a complete Towing Starter Kit # C45534 which gives you a ball mount, 2-inch ball, pin and clip and hitch lock.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 12000 lbs GTW
- Class III
- CURT
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- Pre-Torqued
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Arms for Roadmaster EZ5 Base Plate Kit for 2015 Honda Fit
- Q&A: Tire and Wheel Size to Replace 18.5x8.5-8 on Trailer
- Q&A: Parts Needed To Install Solera Awning Fabric On Slide-Out
- Q&A: Replacement Fulton Winch Strap Measuring 1-7/8 Inches by 14 Feet Long
- Article: How to Charge RV Batteries
- Q&A: What Hitch Gives the Highest Ground Clearance on My 2022 Toyota Sienna?
- Q&A: Replacement for Atwood 70254 RV Landing Gear Switch
- Q&A: Are Thule Fork-Mount Bike Racks Okay to Use With Carbon Forks?
- Article: How to Choose the Right Trailer Hitch Class
- Article: Gooseneck to 5th Wheel Adapters
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: What Exactly is Tongue Weight?