Parts Needed To Install 7-Way on 2007 Ford F-150

Question:

i have a 2007 f150 with a 4 way flat plug i am trying toget a 7way plug , whats my best way for sells a T adapter but quite expensive

asked by: Joe

Expert Reply:

To install a 7-way wiring harness on your 2007 Ford F-150, I would recommend using the Brake Controller 7 and 4 Way Installation Kit, part # ETBC7. The # ETBC7 kit will come with all the wiring and circuit breakers needed for installation.

To install, you will begin by connecting your existing 4-way to the 4-way on the ETBC7. The White wire is ground and will need to be connected to a clean metal surface on vehicle frame. The Black wire and should be connected to the vehicles battery through a 40-amp circuit breaker, the Blue wire will be connected to the blue trailer brake feed wire on the brake controller, and the Purple wire is the auxiliary wire and is for reverse lights if your trailer has reverse lights. If any of these connections are not needed just wire tie them up out of the way for future use.

The item you selected, Ford Replacement OEM Tow Package Wiring # 118242, is for 1997-2004 models of the F-150 and will not fit your 2007 F-150.

I have linked instructions for the Brake Controller 7 and 4 Way Installation Kit, part # ETBC7.