Is There a Cap or Cover for the Outlet of the Waste Master RV Sewer Hose Part # LC359724

Question

Question:

Hello is there a cap or cover that goes or the head unit of the drain system. Or is the shut valve stopping all small drips that may occur? Thanks...

asked by: Charlie

1

Helpful Expert Reply:

The outlet of the Waste Master RV Sewer Hose part # LC359724 has a watertight shutoff valve that should stop even small drops of water from passing through. There is not a cover/cap for this but it would not be needed because the valve will stop any leaks.

I have attached a review video for you as well.

expert reply by: Conner L

1

click to enlarge

Answer 1

Yes, the Waste Master RV Sewer Hose w/ Camlock Fittings, Nozzle, and Endcap - 20' Long #LC359724 can be stored in your bumper without worry of the heat causing it to go bad. The only thing you need to have is the right amount of space to…

view full answer...

Answer 2

I went out to the warehouse and pulled the Lippert Waste Master RV Sewer Hose #LC359724 to measure the 90 degree end with the lever and handle. The overall length from the furthest point forward to the end of the handle is 8 inches. The overall…

view full answer...

Answer 3

The only option I have for you to seal the end of the Waste Master RV Sewer Hose part #LC359724 while in storage would be to use an additional cap like part #LC360578 on the end of the hose opposite of the valve. Unfortunately, we do not have any…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 8

Yes, they are if your axles are overslung and the springs sit on top of them. The SumoSprings Trailer Helper Springs for 5-8K Axles item #SS26MV will work with a triple axle set up. They do a great job of absorbing road shock while also working to…

view full answer...

Answer 9

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Is There a Cap or Cover for the Outlet of the Waste Master RV Sewer Hose Part # LC359724

Product Page this Question was Asked From

Continue Researching