Will Torklift RV GlowSteps Fit Outdoors RV 250RDS

Question

Question:

How do I measure to determine the correct size, The steps will be for an Outdoors RV 250RDS. Thanks.

asked by: Dale B

0

Expert Reply:

Measure from the ground to the top of the threshold on your Outdoors RV 250RDS. If that distance is 31-42 inches the TorkLift GlowStep Stow N' Go Scissor Steps # TLA7834 that you referenced will fit and work well. If you have a different threshold height let me know and I'll see what we have that could fit.

expert reply by: Jameson C

0

Thomas N.

5/2/2020

I have a door height of 57 is there anything avialable for this height?

Reply

Chris R.

5/4/2020

Yes, but you'll need to go up to a 6-Step assembly. The TorkLift GlowStep # TLA7836 works perfectly with entry heights between 46-1/2 and 58".

Reply

Answer 1

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7834 only comes in the silver color with the black brackets. The overall folded dimensions are 14" High x 23-1/4" Wide x 11" Deep which includes the…

view full answer...

Answer 2

I spoke to TorkLift about the issue you're having with the TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7834 and they informed me to inform you to tighten the hinge tension on the side that's sagging. I have attached…

view full answer...

Answer 3

The top to bottom distance for the holes in the mounting bracket that comes with the TorkLift GlowStep Stow N' Go Scissor Steps #TLA7834 is 2-1/2" on center.

view full answer...

Answer 4

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

view full answer...

Answer 5

The TorkLift GlowStep Stow N' Go Scissor Steps #TLA7844 is going to extend out roughly 38 inches from where it installs. I say roughly since it's a scissor step and how far the steps extend changes the distance they stick out.

view full answer...

Answer 6

I do have an option for you but the SolidStep Manual Fold-Down Steps are not a good fit for your 2019 Palomino Backpack HS-8801 Truck Bed Camper because they do not make any that will fit your 22" wide doorway. Instead, I highly recommend…

view full answer...

Answer 7

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7844 is an excellent option for your camper. It will give you 4 steps up to your bumper and have a mounting bracket height of 35-3/8". This will enable you to mount it…

view full answer...

Answer 8

If you had a TorkLift GlowStep Stow N' Go #TLA7834 installed and when it was fully deployed it wasn't touching the ground you'd run risk of bending or breaking the setup. If it was a lower height than usual the steps would just basically…

view full answer...

Answer 9

You may be able to use the TorkLift GlowStep Stow N' Go steps, though it is going to depend on the width of the area you are looking to mount them. You'll want to take a measurement of the mounting area width to determine if the mounting…

view full answer...

Answer 10

We have the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear like part #TLA7844 which fold up and install on the bumper, but I'm not aware of any options that would flip up like the Lippert SolidStep ( #LC791574 for reference) and…

view full answer...

Answer 11

That sounds like a great adventure, hopefully we can help meet your needs. Please take a look at the SolidStep Manual Fold-Down Steps, #LC791575. This is for entry height of 35" to 44" and the doorway needs to be at least 29". I have…

view full answer...

Answer 12

The bracket on the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - Black Bracket #TLA7834 has holes spaced 9-3/4" apart horizontally and 2-1/2" vertically. The bolt holes are 3/8" in diameter.

view full answer...

Will Torklift RV GlowSteps Fit Outdoors RV 250RDS

Product Page this Question was Asked From

Continue Researching