How to Manually Operate Jacks in Lippert Ground Control LC358590 Auto-Leveling System

Question:

We are in the desert and are having issues getting our leveling Jacks up on the right side

asked by: Lisa M

Expert Reply:

RV auto-leveling systems such as the Lippert Ground Control # LC358590 may sometimes need to be reset to clear error codes. To clear that code, you can press the retract button and the enter button simultaneously hold both for about 3 seconds and it will clear the error code. You can also try powering down the entire system and waiting a few minutes before reconnecting power.

You also always have the option of manually raising or lowering the jacks using the access ports on the bottom and the top of each jack's motor so that the jacks can still be raised or lowered in the event of a power failure. To use these ports you must have a 3/8-inch drive ratchet and extension (not included). The bottom ports also require a 5/16-inch socket. The photo shows the small cap on the top of the jack that is to be removed for manual cranking.

expert reply by: Adam R