Replacement Camera Recommendation for Jensen Head Unit

Question

Question:

Rear camera went out and i get audio only out of it. It says no camera input when inserted. Do you know a direct replacement that will work with my system?

asked by: Gary M

1

Helpful Expert Reply:

We have a replacement camera that is designed to work with Jensen/Voyager stereos as part # VCMS17B. You might still compare the connector you have on your stereo to the connector in the picture I attached to make sure it's the same one but it should work fine.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The Voyager Rear Camera item #VCMS17B is only available in black. All of the back up cameras we offer are black.

view full answer...

Answer 2

The Voyager monitor part #VOM719WP will work great as a replacement monitor for what you have now with the AOM-7694.

view full answer...

Answer 3

Absolutely! On the diagram that you mentioned, which I have attached for reference, the wire numbers are as follows: 1. Red (power +) 2. Yellow (Left) 3. Brown (Right) 4. Blue (Back/Rear) 5. Black (Ground) I have also attached the complete…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The most likely cause of the "no signal" error you are receiving with the Furrion Vision S Wireless RV Backup Camera System part #FOS43TASF is due to an interruption on the camera's power wire. Make sure that the camera is receiving…

view full answer...

Replacement Camera Recommendation for Jensen Head Unit

Product Page this Question was Asked From

Continue Researching