Size of Tubing on Stromberg Carlson RV Exterior Ladder # LA-401

Question

Question:

What size is the tubing on the aluminum uprights?

asked by: John

0

Expert Reply:

The tubing on the aluminum uprights for the Stromberg Carlson RV Exterior Ladder # LA-401 that you referenced features an outer diameter of exactly 1 inch. I have attached a short video demonstration that you can also check out.

expert reply by: Chris R

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 4

Because the face of the magnet rides against the armature (inside) surface of the brake drum, any grooves that had previously been worn into the armature surface will cause the magnet to wear unevenly. For optimal braking performance, you want…

view full answer...

Answer 5

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...

Answer 6

The Sunchaser awnings are made by Dometic. We do not carry the Dometic awnings, however we do have replacement fabric that will work. From what I found using the information you provided, it looks like you have a 16' awning. If that is the case,…

view full answer...

Answer 7

I reached out to Lippert who informed me your Power Gear controller 140-1224 Rev 0G is obsolete. It was replaced with the Lippert part number 372854 but that part is also now obsolete. At this point your options are to try and have your controller…

view full answer...

Answer 8

There is a difference in the thickness of the material used to build the center sections for the Reese M5 #RP30918 and Reese M5 #RP37FR as well which as the additional bolt in the 27k.

view full answer...

Answer 9

The correct replacement for an Atwood RV Water Heater GC10A-3E is the Atwood RV Water Heater part #AT94022 or GC10-4E. This water heater measures 16" tall x 15-1/2" wide x 20-7/8" deep which should be an exact match for what you have…

view full answer...

Answer 10

Thank you for the drawing. It was helpful to see the dimensions you are looking at. We only have one ladder that is a universal fit application, so it will fit your RV but it will not fit in a custom way. It will absolutely be able to give you a…

view full answer...

Answer 11

I suggest you first check with your sales person to ensure your 2022 Coachman Forest River Cross Trail has the needed backing for mounting a ladder. Or, contact the OEM directly for a build drawing to show where the pillars are located. Ladder…

view full answer...

Answer 12

While we do not carry the exact model we do have two great replacement options for you. The Furrion Standard RV Microwave comes in a Mirror Glass part #FMSN09MG and Black part # FMSN09BL.

view full answer...

Size of Tubing on Stromberg Carlson RV Exterior Ladder # LA-401

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching