2015 Subaru Legacy 2.5 Trailer Hitch Recommendation for Towing Small Trailer
Question:
Could you point me in the right direction for hitch installation on my 2015 Subaru legacy 2.5 able to pull a 1981 13ft Scamp? Scamp empty weight is about 1000lbs. Thanks!!
asked by: Nate
Expert Reply:
We can definitely help point you in the right direction to pick out all of the correct components to tow a trailer with your 2015 Subaru Legacy. The first thing you'll want is a trailer hitch which for that I recommend the Draw Tite part # 75673 which is a custom fit Class III hitch with a 2 inch opening. This means it has plenty of capacity and was designed to specifically fit your vehicle. I attached an install video for this hitch for you to check out as well.
For trailer wiring the kit I recommend is the T-One kit part # 118671 because it fits your vehicle by plugging inline with the taillight connectors which means you won't have to do any hardwiring or splicing and because it has our most reliable converter box of all of the kits we have. I attached an install video for this too.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
Products Referenced in This Question
T-One Connector Assembly w/Upgraded Circuit Protected ModuLite HD Module
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: Recommended Tire Clearance Between Tires on Dual Axle Trailer
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Strut for Stabilus Lift-O-Mat on Dometic Awning
- Q&A: Is a Master Key Needed to Install or Remove a Thule Lock Cylinder
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Can Electric Trailer Brake Kit # AKEBRK-2 be Submerged in Water
- Q&A: Battery Box that Can Fit Trailer Frame
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Best Bike Racks for Electric Bikes
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)