Best Trailer Hitch, Wiring Harness and Ball Mount for 2019 Hyundai Santa Fe
Question:
For a 2019 hyundai santa fe im trying to tow a smaller trailer. i need a trailer hitch and also wiring. what else do i need to tow and what is it that you recommend?
asked by: Paul H
Expert Reply:
The trailer hitch I recommend for your 2019 Hyundai Santa Fe is the Curt # C13195 because of Curt's strong reputation for manufacturing very high-quality hitches that are also assembled in the USA.
This Class III, 2" trailer hitch is a complete bolt-on installation so it will not require any drilling into the frame of your '19 Santa Fe. This hitch has a black powder coat finish which helps protect it from corrosion and also has a 5,000 lb towing capacity and 750 lb tongue weight capacity. The Curt # C13195 is assembled in the USA and comes with a lifetime warranty. If you take a look at the accompanying photo a customer sent in you can see how it looks when installed on a 2019 Santa Fe.
The wiring harness I recommend for your 2019 Hyundai Santa Fe is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # CU94FR because it is easy to install; you will only need to plug it into a connection point at the back of your Santa Fe to get a 4-flat connector.
I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise or 4” drop - a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip.
You can use the link to the help article on ball mounts I've added to determine if this kit will give you the correct amount of drop or rise. I've also attached a link to our page with each of our ball mounts for you to check out as well as links to reviews of the wiring harness and ball mount.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Arms for Roadmaster EZ5 Base Plate Kit for 2015 Honda Fit
- Q&A: Parts Needed To Install Solera Awning Fabric On Slide-Out
- Q&A: Replacement Fulton Winch Strap Measuring 1-7/8 Inches by 14 Feet Long
- Article: How to Charge RV Batteries
- Q&A: What Hitch Gives the Highest Ground Clearance on My 2022 Toyota Sienna?
- Q&A: Replacement for Atwood 70254 RV Landing Gear Switch
- Q&A: Weight of 21K Demco Hijacker AutoSlide 5th Wheel Hitch
- Q&A: Are Thule Fork-Mount Bike Racks Okay to Use With Carbon Forks?
- Article: How to Choose the Right Trailer Hitch Class
- Article: Gooseneck to 5th Wheel Adapters
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: What Exactly is Tongue Weight?