Troubleshooting Hopkins Engager Breakaway Kit Not Activating Trailer Brakes
Question:
i have the engager kit # BA10-150 i have battery power and continuity through the pull tab. but the brakes wont engage. i was looking for a wire diagram so i dont have to cut down the whole harness. the brakes engage when a truck is connected.
asked by: Trey T
Expert Reply:
Just to make sure that I am understanding correctly, you installed the Hopkins Engager # 20099 on your trailer and it doesn't activate the brakes on your trailer when you pull the pin, but your trailer brakes are working when you send power back with your brake controller.
The first thing I would check is to make sure that the battery is charged. You can do this by simply pressing the "Test" button on the battery box to see if it is charged or needs to be recharged.
If that isn't the problem then it is most likely the connection from your breakaway switch to the brake wiring. Make sure that is securely connected and none of the wiring is damaged.
Let me know if you are still having issues and I can help you troubleshoot further.
Product Page this Question was Asked From
Hopkins Engager Push-To-Test Trailer Breakaway Kit w/ Built-In Charger - Side Load - 7" Wire
- Trailer Breakaway Kit
- Kit with Charger
- Side Load
- Single-axle
- Tandem-axle
- LED Tester
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review
- Video: Trailer Brake Controller Installation - 2015 Chevrolet Colorado
- Shop: Hopkins Engager Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Shop: Westlake ST235/80R16 Radial Trailer Tire w/ 16" Silver Mod Wheel - 8 on 6-1/2 - Load Range E
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Ram Gooseneck to 5th Wheel Trailer Coupler Adapter Inner Tube - Square - 30,000 lbs
- Shop: Hopkins Engager Push-To-Test Trailer Breakaway Kit w/ Built-In Charger - Side Load - 7" Wire
- Q&A: How To Wire Up Hopkins Engager Push-To-Test Trailer Breakaway Kit
- Q&A: Installation Instructions For Hopkins Engager Trailer BreakAway Kit
- Search Results: junction box
- Search Results: fifth wheel gooseneck adapter
- Search Results: break away trailer brake
- Search Results: trailer brake controller
- Video: Hopkins Trailer Breakaway Kit - Kit with Charger - 20099 Review
- Video: Spectro Trailer Wiring Junction Box Installation
- Video: etrailer Gooseneck and Fifth Wheel Adapters - Adapts Trailer - KPG5-Q30IP Review
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: gooseneck to fifth wheel adaptor
- Shop: Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Troubleshooting Hopkins Engager Break Away Kit That Wont Recharge Battery
- Video: etrailer Trailer Brakes AKBRKR-M12 Review
- Q&A: Troubleshooting Engager Trailer Breakaway System That Keeps Brakes Engaged
- Q&A: Troubleshooting Brake Controller that Says It's Not Connected to Trailer
- Q&A: Troubleshooting Hopkins Trailer Breakaway Unit That Does Not Engage Trailer Brakes
- Q&A: Which Wire on Trailer Brake Magnet is the Positive and Ground
- Search Results: elec magnets for electric brakes
- Search Results: brake actuator
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function