Availability of Winch Plate Front Mounting Adapter for 2004 Chevrolet Silverado

Question

Question:

I need a adapter for a 2004 Chev Silverads 2500K front mount what do you have. winch plate adapters

asked by: Bill S

0

Expert Reply:

I have a selection of front mount hitch mounting plates to choose from. I am including a link to a product page that will list the choices of mounting plates.

Our most popular mounting plates for front mount hitch is the CURT Trailer Hitch Electric Winch Mount Plate, part # C31010, that you have referenced.

You will need to match up the mounting hole dimensions on your electric winch to the mounting hole dimensions on the mounting plate to make sure it will fit.

expert reply by: Jeff D

0

click to enlarge

Answer 1

The picture for determining bolt pattern is actually a little easier than maybe it seems. You just need to measure across the wheel like it shows and then count the amount of lug holes and that's all you need. So if it's 5 inches and its a 5…

view full answer...

Answer 2

Yes, the Superwinch Tiger Shark Series Off-Road Winch #SW1511200 that you referenced will fit the Curt Winch Mount part #C31010 that you also referenced. The winch has more capacity than the mount so you would have to stay under the 9k rating of the…

view full answer...

Answer 3

The Bulldog Winch part #BDW15020 would be a great option for your setup. This is a 4,400 lb 12 volt winch which uses a synthetic rope instead of a steel cable. It powers in and out and has a built in brake as well. The winch also moves at 19 feet per…

view full answer...

Answer 4

The pre-mounted combinations of trailer wheels and trailer tires that we offer are given a degree of balancing by the distributor but not a full dynamic balance on a balancing machine as passenger car tires require. I will explain. Wheels and tires…

view full answer...

Answer 5

I went out to the warehouse and pulled a CURT Trailer Hitch Electric Winch Mount Plate, #C31010, to measure it. From the back of the mounting plate to the center of the nearest hitch pin hole, it is 4-1/4 inches. -The distance to the center hole is…

view full answer...

Answer 6

For mounting a winch to a trailer like the Superwinch #SW1455201 one solution is to weld a hitch tube to the trailer like with the part #E-9 so that you could use a winch mounting plate like the #BDW20011 and have a way to easily remove and reinstall…

view full answer...

Answer 7

Troubleshooting electric trailer brakes is much easier if you disconnect the trailer plug from the truck and test each side separately. The process is not complicated and you need only a few items. I suggest starting on the trailer. You'll just…

view full answer...

Answer 8

For a shut off switch with the Bulldog Winch part #BDW10030 I'd recommend the switch part #BDW20248 which is rated for 500 amps and is very easy to use. This is a cheap insurance policy for your winch wiring so it would be a really great…

view full answer...

Answer 9

For the Curt winch mount, #C31010, or any of the similar mounts, you will need to compare the mounting pattern on the mount to what your winch requires. I have included 2 pictures. One shows the mount pattern of the Curt mount.

view full answer...

Answer 10

The Superwinch S7500 Trailer Winch #SW1475201 is designed to have more of a "universal" style for mounting and may require some adaption for installation because it does not have a typical mounting pattern. The Superwinch S7500 Trailer…

view full answer...

Answer 11

I can understand why this might be confusing, when it comes to the different ratings. Rolling capacity is essentially just the capacity of the winch to pull a load that is moving up an incline; technically the capacity that is listed is the maximum…

view full answer...

Answer 12

I do have an option for you but there isn't any receiver mount options for the Superwinch Winch 2 Go Portable part #SW1140232 since it's designed to be portable and it's a little underrated for full-size trucks. Instead, I recommend the…

view full answer...

Availability of Winch Plate Front Mounting Adapter for 2004 Chevrolet Silverado

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching