Solution for Needing Quick Grip Replacement for Thule Cargo Box

Question

Question:

Hello, Im just wondering if its possible to buy the claw covers as a separate part or if they only come as a complete unit? Mine have gotten pretty warn out but the assembly still works fine. Thanks!

asked by: Jesse

0

Expert Reply:

I wish that was a part that Thule offered but at this time the only solution we have would be the Quick Grip part # TH05738 that you referenced.

expert reply by: Jameson C

0

Answer 1

It is possible that the Replacement Quick Grip Mount Assembly #TH05738 will work on your BMW box, though they have never been tested together and we don't have any type of access to those cargo boxes so it is impossible to make a definitive…

view full answer...

Answer 2

Thanks so much for the photo and the info on your cargo box model. I'm not 100 percent certain which part you are referring to, so I will list all of the available replacement parts for your Thule Atlantis 1600XT cargo box, which I confirmed with…

view full answer...

Answer 3

When it comes to attaching your Thule Ascent 1100 To the Thule Aero Blade Crossbars you will need. The Replacement Quick Grip Mount Assembly - Thule Ascent, Atlantis, and Force Cargo Box - Qty 1 #TH05738 which will replace a damaged quick mount…

view full answer...

Answer 4

Can you please send me a photo of the box and include any markings if present?

view full answer...

Answer 5

Thank you for sending in the photo to the separate email! Thule has changed hardware from time to time and sometimes hardware is compatible between different boxes. The clamps you have are definitely the Quick Grip Mount Assembly #TH05738 and from…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Solution for Needing Quick Grip Replacement for Thule Cargo Box

Product Page this Question was Asked From

Continue Researching