How Many E-Track Clips Does CargoSmart Adjustable Cargo Net for E-Track Systems # 3481709 Have

Question

Question:

the picture only shows one E-trac fitting..Does it have 4?? one on each corner ??

asked by: Greg

1

Helpful Expert Reply:

Actually the CargoSmart Adjustable Cargo Net for E-Track and X-Track Systems # 3481709 has 6 clips that insert into E-track. 3 on each side. One on the very bottom, the middle, and the top.

expert reply by: Jameson C

1

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 3

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long…

view full answer...

Answer 4

We do have a solution to mount the #288-07503 in what I'm assuming is an enclosed trailer. What you can use is the CargoSmart Rotating Safety Ladder Hook #CS57FR. You will also need E-track to be able to mount the hooks. If you want some single…

view full answer...

Answer 5

The fixed section of the CargoSmart Adjustable Cargo Net for E-Track and X-Track Systems #3481709 is 96" while the adjustable section can be adjusted from 68" - 84" as you can see in the attached photo. I've also linked a review…

view full answer...

Answer 6

The locking mechanism for the MORryde RV Cargo Sliding Tray #MR44FR is only going to keep the tray locked in the rollers and they don't really offer any kind of way to lock the tray at certain extensions. To avoid spending a fortune or making…

view full answer...

Answer 7

The CargoSmart Adjustable Cargo Net for E-Track and X-Track Systems - 68" x 96" #3481709 can be installed on the walls of your enclosed cargo trailer. This will not be a problem as long as you are not exceeding the safe working load limit…

view full answer...

Answer 8

I do have a solution for you, but I think welding something to the floor is going to really limit where you can place things to have them tied down. I don't think you're going to be able to get away from the issue with galvanic corrosion…

view full answer...

Answer 9

To get power to the pin in the 1:00 position of the #PK12703 7-way trailer connector, you'd run a length of 10 gauge wire #10-1-1 which is sold by the foot from the terminal for the 1:00 pin on the 7-way to the positive battery terminal, via a…

view full answer...

Answer 10

Yes, the Trailer Valet RVR9 Remote-Controlled Trailer Dolly #TVRVR9 will climb a loading ramp like the #288-07432 into the back of your truck. I confirmed this with Trailer Valet to ensure that it did not have an out of level sensor that would stop…

view full answer...

How Many E-Track Clips Does CargoSmart Adjustable Cargo Net for E-Track Systems # 3481709 Have

Product Page this Question was Asked From

Continue Researching