Replacement 5 Spoke Utility Trailer Hub and Drum Assembly Needed
Question:
Hi, my tire was flat on my Hudson trailer.. so in going to remove the hub every bolt snapped as they were seized on. Not sure which hub I need. Wondering if you had any insight. Thanks!
asked by: Joe G
Expert Reply:
Thank you for the picture!
It looks like you have a hub that is similar to the Dexter Trailer Hub and Drum Assembly # 8-174-5UC3 which uses the 5 spoke utility style. This hub and drum assembly has a 12" inner diameter and is compatible with 6,000 lb and 7,000 lb axle. The bolts measure 6-1/2" from bolt to bolt and then 5-3/8" from each bolt to the center.
To verify that this will fit you simply need to look at the bearings and grease seal that you removed with your hub and drum assembly. This assembly uses the inner bearing # 25580 (1.75" inner diameter), outer bearing # 15123 (1.25" inner diameter), and the grease seal 10-10 which is equivalent to the part # RG06-090 which has an inner diameter of 1.125".
If you can't find part numbers on your old bearings and seal then you can use a digital caliper to measure your spindle where the bearings and seal sit (see attached photo).
Products Referenced in This Question
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
10-10 Grease or Oil Double-Lip Seals - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 5 Spoke Utility
- Dexter
more information >
Continue Researching
- Q&A: Can Factory Brake Controller Be Installed on 2018 Chevy Silverado
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Recommended Spindle For # 8-174-5UC3 Trailer Hub And Drum Assembly
- Article: Trailer Jacks
- Q&A: Issue with Bearing Buddy Leaking Grease from Overfill Port
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing
- Q&A: Replacement 12-1/4 Inch x 3-3/8 Inch Braking Assembly with Four Bolt Brake Mounting Flange
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Measure a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern