Ladder Rack Recommendation for 2018 Toyota Tacoma with Deck Rail System

Question

Question:

My 2018 Toyota Tacoma has the deck rail system and I need a ladder rack.

asked by: Andy

0

Expert Reply:

For your 2018 Toyota Tacoma with the deck rail system the T-Rac Pro2 part # TH37005XT is a confirmed fit and would work well. The rack has a 1,000 lb capacity and comes with load stops as well. We had the chance to install this ladder rack on a 2018 Tacoma like yours and found that it fit and worked well. Check out the review video I attached to this page to see this.

expert reply by: Jameson C

0

click to enlarge

Answer 1

There are only two ladder racks for your 2018 Toyota Tacoma with the factory deck rail system that are black in color which are the Thule Xsporter Pro Ladder Rack part #TH500XTB-THXK4B and the Thule TracRac TracONE Ladder Rack part…

view full answer...

Answer 2

The Thule TracRac TracONE Ladder Rack #TH27000XTB-XK4B that fits your 2022 Toyota Tacoma will stay on your truck after being installed. It is not something that will be easily removed, which is true of all ladder racks.

view full answer...

Answer 3

Hey Shannon, thanks for reaching out! Sounds like you're looking for the Thule Xsporter Pro #TH500XTB-THXK3 for your 2008 Toyota Tacoma with the Deck Rail System. This is adjustable up and down as well as along the Deck Rail System so you get…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 6

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

First you are going to want to disassemble one of your hubs to verify if you have the #42 Spindle #TRU37FR. I have found this is the spindle some have found but you will need to determine it is what you have and if not you will need to have a pair of…

view full answer...

Answer 10

If you have a 2017 Toyota Tacoma with the tow package/factory 7-way yes it is pre-wired for a brake controller. For a brake controller I recommend the Prodigy P3 Brake Controller part #90195. This is our best selling brake controller because of how…

view full answer...

Answer 11

We actually have the Brake Buddy 32220 reverse solenoid available with the Titan Solenoid Valve Replacement Kit #TK71-755-00. The solenoid itself would be an exact replacement and it features the two mounting holes at the bottom like you described…

view full answer...

Answer 12

The mounting holes on the Curt 5-Position Adjustable Channel Bracket #C48650 measure 10" center of hole to center of hole.

view full answer...

Ladder Rack Recommendation for 2018 Toyota Tacoma with Deck Rail System

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching